NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
SAMSUNG
8GB DDR3 1600 ECC registered server memory model M393B1G73DB0-YK0 with CL11 latency and 1.35V operation
This 8 GB DDR3 1600 module is built for servers and workstations that require error-correcting registered memory. It operates at 1.35 V with a CAS latency of CL11 and uses the standard 240-pin form factor. The stick has no heat spreader, keeping the profile low for dense configurations.
Replaces unbuffered or lower-speed DDR3 DIMMs when data integrity and signal stability are required. The registered buffer reduces electrical load on the memory controller, making the jump worthwhile for multi-DIMM channels or mission-critical workloads. Systems limited to 1.5 V DDR3 will not support the 1.35 V operating voltage.
Installation follows the usual 240-pin DDR3 slot alignment; press evenly until the latches click. The most common issue is mixing registered and unbuffered modules, which prevents boot. Verify the platform supports 1.35 V DDR3 1600 and registered ECC before seating the DIMM.
| Brand | SAMSUNG |
|---|---|
| Model | M393B1G73DB0-YK0 |
| Capacity | 8GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Heat Spreader | No |
| Features | Reliable, high performance |
| Peso de envío | 0.09 kg |
| Dimensiones del paquete | 140 × 51 × 13 mm |
The module uses the standard 240-pin DDR3 form factor and 1.35 V operation, matching server slots wired for PC3-12800 memory.
Align the key notch, press firmly until both side clips click, then verify the system recognises the registered buffer and ECC at 1600 MT/s.
DDR3 DRAM has no moving parts; plan replacement only if ECC logs show rising correctable errors or a DIMM fails POST.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?