SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
SanDisk
A 500 GB 2.5-inch SATA internal SSD with 3D NAND delivering sequential reads up to 560 MB/s and writes up to 510 MB/s for faster boots and app loads
This SanDisk Ultra SSD provides 500GB of storage over a SATA III connection. It uses 3D NAND flash and nCache 2.0 technology to accelerate everyday tasks. The drive is built for consumer laptops and desktops that accept a 2.5-inch form factor. It has no moving parts, so it runs silently and resists shock.
Sequential reads reach up to 560 MBps and writes up to 510 MBps under continuous transfer. The nCache 2.0 layer absorbs bursts before flushing to the 3D NAND array. Lower power draw compared with mechanical disks helps notebook batteries last longer during extended sessions. Performance stays consistent because there are no spinning platters to slow down.
A standard 2.5-inch SATA connector fits existing drive bays and caddies without adapters. The solid-state construction survives drops that would damage a hard drive. Shock resistance protects data if the system is knocked while running. The SATA interface ensures broad compatibility with older and current motherboards.
| Brand | SanDisk |
|---|---|
| Series | Ultra |
| Model | SDSSDH3-500G-G26 |
| Part Number | SDSSDH3-500G-G26 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 500GB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 510 MBps |
The 3D NAND technology lowers power usage compared to mechanical drives, helping extend notebook battery life during continuous workloads.
A standard SATA data cable and a matching SATA power connector from the system are required for the 2.5" form factor.
The SATA interface is backward compatible, so the drive will function on a SATA II port at that port's speed limit.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?