Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5-inch bare SCSI hard drive with 80-pin connector

Seagate

Seagate Cheetah 10K.6 ST3146807LC 147GB 10000 RPM 8MB SCSI Ultra320 80pin 3.5" internal hard drive

SKU CH-FGDC-J7PNR

A 147GB 10000 RPM SCSI Ultra320 80-pin 3.5-inch internal hard drive with 8MB cache and 4.7ms average seek time

  • PackagingBare Drive
  • InterfaceSCSI Ultra320 80pin
  • Capacity147GB
  • RPM10000 RPM
  • Cache8MB
  • Average Seek Time4.7ms
  • 10,000 RPM spindle for rapid data access
  • 7 ms average seek time cuts latency
  • SCSI Ultra320 80-pin interface moves data fast
  • 147 GB capacity stores critical workloads
  • 5-inch form factor fits standard bays

Seagate Cheetah 10K.6 147GB SCSI Drive

The Seagate Cheetah 10K.6 ST3146807LC is a 147GB 3.5-inch internal hard drive spinning at 10000 RPM with an 8MB cache. It uses a SCSI Ultra320 80-pin interface and is supplied as a bare drive. Average seek time is 4.7ms, average write time is 5.3ms, and average latency is 2.99ms.

Who This Suits and Who It Does Not

This drive suits maintainers of legacy servers or storage arrays that require a SCSI Ultra320 80-pin connection and a 3.5-inch form factor. Buyers who need larger capacities or newer interface standards should look elsewhere.

The Deciding Specification

The SCSI Ultra320 80-pin interface is the single specification that determines compatibility; the drive will only function in systems equipped with a matching controller and backplane.

Kohokohdat

  • 10,000 RPM spindle for rapid data access
  • 7 ms average seek time cuts latency
  • SCSI Ultra320 80-pin interface moves data fast
  • 147 GB capacity stores critical workloads
  • 5-inch form factor fits standard bays

Tekniset tiedot

BrandSeagate
SeriesCheetah 10K.6
ModelST3146807LC
PackagingBare Drive
InterfaceSCSI Ultra320 80pin
Capacity147GB
RPM10000 RPM
Cache8MB
Average Seek Time4.7ms
Average Write Time5.3ms
Average Latency2.99ms
FeaturesLower ownership cost
Super-fast data transfer rates
Great value
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How is the 80-pin SCSI Ultra320 drive installed in a 3.5" bay and what step is often missed?

Mount the bare drive in a 3.5" bay, connect the 80-pin SCA connector to a hot-swap backplane or 68-pin adapter, then set a unique SCSI ID via the jumpers before powering on.

What maintenance or replacement will the ST3146807LC need later?

The 10 000 RPM mechanical assembly and bearings are the primary wear items; plan to replace the drive once SMART reallocated-sector counts rise or seek times exceed the 4.7 ms / 5.3 ms specs.

What limit appears first during sustained workloads on this Cheetah 10K.6?

The 8 MB cache fills quickly under heavy random I/O, so average latency settles at the 2.99 ms rotational limit before the Ultra320 bus saturates.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.