Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch hard drive with label showing Seagate Exos X18 12TB

Seagate

Seagate Exos X18 ST12000NM000J 12TB 7200 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-1YXM-K0MN2 MPN ST12000NM000J

Enterprise 12 TB hard drive with 7200 RPM, 256 MB cache and SATA 6.0 Gb/s interface

  • InterfaceSATA 6.0Gb/s
  • Capacity12TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • 12TB capacity stores massive datasets in a single 3.5" drive
  • 7200 RPM spindle speed delivers fast sequential access for enterprise workloads
  • 256MB cache buffers bursts and reduces average latency to 4.16ms
  • SATA 6.0Gb/s interface provides broad compatibility with existing servers
  • Helium-sealed design lowers power per terabyte and cuts weight for rack density

Enterprise capacity drive

The Seagate Exos X18 ST12000NM000J is a 12TB 3.5-inch hard drive built for enterprise storage workloads. It spins at 7200 RPM with a 256MB cache and connects through a SATA 6.0Gb/s interface. Helium-sealed construction and PowerBalance technology optimise watts per terabyte for large-scale deployments. Digital environmental sensors monitor internal conditions for consistent operation.

Suits hyperscale and archive workloads

This drive targets cloud data centres and massive scale-out environments that prioritise capacity density and total cost of ownership. Buyers who need the 18TB maximum capacity mentioned in the series highlights should look at a higher-capacity model. Systems requiring a different interface or a smaller form factor cannot use this SATA 3.5-inch unit.

SATA 6.0Gb/s interface decides fit

The drive communicates over SATA 6.0Gb/s, so the host must provide a compatible SATA port and supporting backplane. Average latency is 4.16ms at 7200 RPM. Physical dimensions are 147.00mm length, 101.85mm width and 26.10mm height for standard 3.5-inch bay planning.

Kohokohdat

  • 12TB capacity stores massive datasets in a single 3.5" drive
  • 7200 RPM spindle speed delivers fast sequential access for enterprise workloads
  • 256MB cache buffers bursts and reduces average latency to 4.16ms
  • SATA 6.0Gb/s interface provides broad compatibility with existing servers
  • Helium-sealed design lowers power per terabyte and cuts weight for rack density

Tekniset tiedot

BrandSeagate
SeriesExos X18
ModelST12000NM000J
InterfaceSATA 6.0Gb/s
Capacity12TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesMarket-leading 18TB HDD offering the highest capacity available for more petabytes per rack*
Highly reliable performance with enhanced caching, making it the logical choice for cloud data centre and massive scale-out data centre applications
Hyperscale SATA model tuned for large data transfers and low latency
PowerBalance feature optimises Watts/TB
Maximise total cost of ownership savings through lower power and weight with helium sealed-drive design
Proven helium side-sealing weld technology for added handling robustness and leak protection
Digital environmental sensors to monitor i
UsageFor Enterprise Storage
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Lähetyspaino0.68 kg
Pakkauksen mitat152 × 102 × 25 mm

Kysymyksiä tästä tuotteesta

Do I need a SATA 6.0Gb/s cable and a 3.5" drive bay with SATA power to install the 12TB Exos X18?

Yes, the drive uses a standard SATA 6.0Gb/s data connector and requires a 3.5" bay with a SATA power connector; the 26.10mm height fits typical desktop cages.

Will the ST12000NM000J work on a motherboard that only supports SATA 3.0Gb/s?

The SATA 6.0Gb/s interface is backward compatible, so the 12TB drive will operate at the 3.0Gb/s link speed on older controllers.

How can I verify the 7200 RPM Exos X18 is healthy after installation?

Check SMART data for zero reallocated sectors, confirm the firmware reports 12TB capacity and 256MB cache, and listen for steady 7200 RPM operation without unusual noise.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.