Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5-inch internal hard drive with silver label and circuit board visible

Seagate

Seagate IronWolf Pro 10TB 7200 RPM 256MB CMR SATA 6.0Gb/s 3.5" ST10000NE0008

SKU CH-MGPZ-M1GDE MPN ST10000NE0008

A 10TB 7200 RPM CMR hard drive with 256MB cache and SATA 6.0Gb/s interface, built for 24×7 NAS workloads and multi-bay RAID environments

  • InterfaceSATA 6.0Gb/s
  • Capacity10TB
  • NAND Flash Memory TypeHard Drive
  • RPM7200 RPM
  • Cache256MB
  • Average Latency4.16ms
  • CMR technology delivers consistent 24×7 performance
  • 7200 RPM and 256 MB cache enable fast data access
  • AgileArray with RV sensors optimises RAID in multi-bay NAS
  • 300 TB per year workload rating and 2.5 M hours MTBF
  • Three-year Rescue Data Recovery service included

10 TB NAS hard drive

The Seagate IronWolf Pro ST10000NE0008 is a 3.5-inch internal hard drive built for multi-bay NAS enclosures. It targets small-business and prosumer users who need 24×7 operation with rotational-vibration tolerance. The drive uses conventional magnetic recording and a SATA 6.0Gb/s interface. It is not suited for single-drive desktop workloads that do not benefit from NAS-specific firmware.

10 TB capacity with 300 TB yearly workload

The 10 TB capacity provides ample space for redundant arrays and large media libraries. A 300 TB per year workload rating and 2.5M-hour MTBF indicate headroom for heavy multi-user access. The 256 MB cache and 7200 RPM spindle sustain throughput during concurrent streams. Workloads exceeding the annual rating or requiring lower latency than the 4.16 ms average may need solid-state alternatives.

CMR build with RV sensors and health management

All-CMR platters avoid the write-performance dips of shingled recording. Built-in rotational-vibration sensors keep performance stable in chassis holding eight or more drives. IronWolf Health Management monitors drive telemetry and issues prevention, intervention and recovery alerts. The drive measures 26.11 mm high, 101.85 mm wide and 146.99 mm long, fitting standard 3.5-inch bays. A three-year Rescue Data Recovery plan is included.

Kohokohdat

  • CMR technology delivers consistent 24×7 performance
  • 7200 RPM and 256 MB cache enable fast data access
  • AgileArray with RV sensors optimises RAID in multi-bay NAS
  • 300 TB per year workload rating and 2.5 M hours MTBF
  • Three-year Rescue Data Recovery service included

Tekniset tiedot

BrandSeagate
SeriesIronWolf Pro
ModelST10000NE0008
InterfaceSATA 6.0Gb/s
Capacity10TB
NAND Flash Memory TypeHard Drive
RPM7200 RPM
Cache256MB
Average Latency4.16ms
FeaturesOptimized for NAS with AgileArray. AgileArray enables dual-plane balancing and RAID optimization in multi-bay environments, with the most advanced power management possible.
Actively protect your NAS with IronWolf Health Management focusing on prevention, intervention, and recovery.
High performance means no lag time or downtime for users during workload traffic for the NAS. Seagate leads the competition with the highest-performing NAS drive portfolio.
Seagate Rescue Data Recovery. IronWolf Pro comes with extra peace of mind for any mechanical, accidental, or natural disaster. With a
UsageEnterprise NAS Hard Drives
Form Factor3.5"
Height (maximum)26.11mm
Width (maximum)101.85mm
Length (maximum)146.99mm
Lähetyspaino0.69 kg
Pakkauksen mitat164 × 135 × 3 mm

Kysymyksiä tästä tuotteesta

Will the ST10000NE0008 run reliably alongside older SATA drives in my existing NAS?

The 7200 RPM spindle speed and SATA 6.0Gb/s interface match legacy drives, while AgileArray dual-plane balancing and rotational vibration sensors keep performance steady in multi-bay chassis.

How can I verify the IronWolf Pro is healthy after installation?

IronWolf Health Management monitors the drive and gives prevention, intervention and recovery recommendations so you can confirm it is operating as intended.

Does the 10TB CMR drive ship with mounting screws or a SATA cable?

Retail or OEM packing may vary; the drive itself is the only item guaranteed in the box.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.