Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Seagate 2.5 inch SAS hard drive bare silver aluminium rectangle .6 inch thick

Seagate

Seagate ST1200MM0139 1.2 TB 2.5" SAS 12Gb/s 10000 RPM 256 MB internal hard drive

SKU CH-ZQFZ-92942 MPN ST1200MM0139

2.5-inch 1.2 TB SAS 12Gb/s internal hard drive spins at 10000 RPM with 256 MB buffer for enterprise workloads

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • NAND Flash Memory TypeSLC
  • RPM10000 RPM
  • Average Latency12Gb/s
  • 2 TB capacity for data-intensive workloads
  • 10000 RPM spindle speed for rapid data access
  • SAS 12Gb/s interface for high-throughput connectivity
  • 256 MB buffer to smooth burst workloads
  • 5 inch form factor fits dense server bays

Enterprise 10K SAS Drive

The Seagate ST1200MM0139 is a 1.2 TB enterprise hard drive built for 2.5 inch drive bays. It spins at 10000 RPM and connects through a SAS 12Gb/s interface with a 256 MB buffer. This combination targets workloads that demand consistent throughput and low latency.

Suited for Transaction-Heavy Arrays

This drive suits database servers, virtualisation hosts and high-performance storage arrays that can exploit 10000 RPM spindle speed and SAS connectivity. Buyers who need capacities beyond 1.2 TB or who require a different physical form factor should evaluate alternative models.

Deciding Specification: SAS 12Gb/s Interface

The SAS 12Gb/s interface is the single specification that determines compatibility; the system backplane or controller must support this exact standard. Without a matching SAS 12Gb/s host connection the drive cannot operate at its rated performance.

Kohokohdat

  • 2 TB capacity for data-intensive workloads
  • 10000 RPM spindle speed for rapid data access
  • SAS 12Gb/s interface for high-throughput connectivity
  • 256 MB buffer to smooth burst workloads
  • 5 inch form factor fits dense server bays

Tekniset tiedot

BrandSeagate
ModelST1200MM0139
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
NAND Flash Memory TypeSLC
RPM10000 RPM
Average Latency12Gb/s
Lähetyspaino0.91 kg
Pakkauksen mitat305 × 229 × 102 mm

Kysymyksiä tästä tuotteesta

Does the 2.5-inch form factor and 0.6-inch height fit a standard 2.5-inch drive bay?

The drive measures 2.5 inches wide, 4 inches deep and 0.6 inches high, matching the standard 2.5-inch internal bay dimensions.

How is the SAS 12Gb/s interface connected, and what is the common mistake?

Connect the SAS data and power cable to the drive's SAS port; the frequent error is not fully seating the connector until it clicks.

When will the 256 MB buffer or 10000 RPM mechanism need replacement?

Enterprise drives of this class are rated for continuous operation; replace the unit if SMART attributes report reallocated sectors or excessive seek errors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.