Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch enterprise hard drive with SAS connector, compact rectangular form factor

Seagate

Seagate ST300MP0006 300GB 15000RPM SAS 12.0GB/s 256MB internal hard drive

SKU CH-XGEQ-0SCT4

300 GB enterprise hard drive with 15 000 RPM spindle speed, SAS 12.0 GB/s interface, 256 MB cache and sustained transfer rates of 300 to 210 MB/s

  • Enterprise-grade speed from 15000 RPM spindle
  • 0 GB/s SAS interface enables rapid data throughput
  • 256 MB cache accelerates frequent read operations
  • Low 2.0 ms average latency cuts access delays
  • Sustained transfers of 300 to 210 MB/s maintain consistent performance

Enterprise 15K SAS Drive

The Seagate ST300MP0006 is a 300 GB enterprise hard drive spinning at 15 000 RPM with a SAS 12.0 GB/s interface and 256 MB cache. It delivers sustained transfer rates from 300 to 210 MB/s and an external rate of 1 200 MB/s. Average latency is 2.0 ms. The unit measures 69.85 x 100.45 x 15.00 mm and weighs 225.0 g.

Suits high-IOPS server workloads

This drive suits database servers, transaction logging and other latency-sensitive tasks that benefit from 15 000 RPM spindle speed and SAS connectivity. It is not for systems that lack a SAS host bus adapter or backplane. Buyers needing larger capacities or lower power draw should look at other options.

Deciding spec: SAS 12.0 GB/s interface

The single specification that decides fitment is the SAS 12.0 GB/s interface. Your controller or backplane must support this exact protocol and speed. Without a compatible SAS connection the drive cannot communicate with the system.

Kohokohdat

  • Enterprise-grade speed from 15000 RPM spindle
  • 0 GB/s SAS interface enables rapid data throughput
  • 256 MB cache accelerates frequent read operations
  • Low 2.0 ms average latency cuts access delays
  • Sustained transfers of 300 to 210 MB/s maintain consistent performance

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I verify the ST300MP0006 is performing correctly after installation?

Check that the drive reports 15000 RPM spindle speed and SAS 12.0 GB/s link speed in your RAID controller BIOS or OS utility; sustained reads should fall between 300 and 210 MB/s with average latency near 2.0 ms.

What ships with the ST300MP0006 and what must I source separately?

The drive itself is included; retail or OEM packing may vary. You will need a SAS 12.0 GB/s backplane or HBA, compatible power cables for +5 V and +12 V rails, and mounting screws for a 2.750 × 3.955 × 0.591 in bay.

Which capacity of the Enterprise Performance 15K line should I choose?

This model is the 300 GB variant with 256 MB cache, 15000 RPM, SAS 12.0 GB/s interface, 6.90 W typical operating power and 225.0 g weight.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.