Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Seagate

Seagate ST32000444SS 2TB 7200RPM SAS 3.5" internal hard drive

SKU CH-2QBD-M8NA7

A 2TB 7200RPM SAS 3.5-inch internal hard drive with a 16MB cache for desktop storage

  • 2 TB capacity stores large datasets
  • 7 200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface fits enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor mounts in standard bays

Seagate 2 TB SAS hard drive

The Seagate ST32000444SS is a 2000 GB internal hard drive built for 3.5 inch drive bays. It connects through a SAS interface running at 6 Gb/s and spins at 7200 RPM with a 16 MB buffer. This drive suits servers and workstations that need reliable bulk storage on a SAS backplane.

Capacity and headroom for SAS arrays

Two terabytes provide room for operating-system images, databases or archival data on a single spindle. The 7200 RPM speed and 16 MB cache handle sequential workloads and moderate random I/O, while the SAS link supports dual-port redundancy. Very heavy random-write queues or latency-sensitive tiers will exceed what a single mechanical drive can deliver.

Bare drive only — no cables or software

The package contains the drive alone, without data cables, mounting screws or management utilities. Installation therefore requires a SAS-capable backplane or controller card and the appropriate cabling. Buyers who need a ready-to-use kit with cables or a software suite should look elsewhere.

Kohokohdat

  • 2 TB capacity stores large datasets
  • 7 200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface fits enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor mounts in standard bays

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Will the ST32000444SS work with my existing 3 Gbps SAS backplane?

Yes, the 6 Gbps SAS interface negotiates down to 3 Gbps automatically, so the drive will operate at the slower link speed without configuration changes.

How can I confirm the 7200 RPM spindle speed is active after installation?

Run SMART diagnostics or check the drive's reported rotational speed in the OS disk utility; it should show 7200 RPM.

Does the bare drive include mounting screws or a SAS cable?

No, the package contains only the bare 3.5" hard drive; mounting hardware and SAS data/power cables must be supplied separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.