暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch bare hard drive with circuit board visible

Seagate

Seagate ST32000444SS 2TB 7200RPM SAS 3.5" internal hard drive

SKU CH-2QBD-M8NA7

A 2TB 7200RPM SAS 3.5-inch internal hard drive with a 16MB cache for desktop storage

  • 2 TB capacity stores large datasets
  • 7 200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface fits enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor mounts in standard bays

Seagate 2 TB SAS hard drive

The Seagate ST32000444SS is a 2000 GB internal hard drive built for 3.5 inch drive bays. It connects through a SAS interface running at 6 Gb/s and spins at 7200 RPM with a 16 MB buffer. This drive suits servers and workstations that need reliable bulk storage on a SAS backplane.

Capacity and headroom for SAS arrays

Two terabytes provide room for operating-system images, databases or archival data on a single spindle. The 7200 RPM speed and 16 MB cache handle sequential workloads and moderate random I/O, while the SAS link supports dual-port redundancy. Very heavy random-write queues or latency-sensitive tiers will exceed what a single mechanical drive can deliver.

Bare drive only — no cables or software

The package contains the drive alone, without data cables, mounting screws or management utilities. Installation therefore requires a SAS-capable backplane or controller card and the appropriate cabling. Buyers who need a ready-to-use kit with cables or a software suite should look elsewhere.

特長

  • 2 TB capacity stores large datasets
  • 7 200 RPM spindle delivers fast sequential throughput
  • SAS 6 Gb/s interface fits enterprise controllers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor mounts in standard bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Will the ST32000444SS work with my existing 3 Gbps SAS backplane?

Yes, the 6 Gbps SAS interface negotiates down to 3 Gbps automatically, so the drive will operate at the slower link speed without configuration changes.

How can I confirm the 7200 RPM spindle speed is active after installation?

Run SMART diagnostics or check the drive's reported rotational speed in the OS disk utility; it should show 7200 RPM.

Does the bare drive include mounting screws or a SAS cable?

No, the package contains only the bare 3.5" hard drive; mounting hardware and SAS data/power cables must be supplied separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。