Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Seagate

Seagate ST9300603SS 9FK066-006 300GB 10000RPM 2.5" SAS internal hard drive

SKU CH-7N48-VPB2E

A 300 GB 2.5" SAS drive spinning at 10000 RPM with a 16 MB cache for fast server storage

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • 6 Gb/s SAS interface enables fast transfers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits dense bays

300 GB 10000 RPM SAS drive

The Seagate ST9300603SS is a 2.5 inch SAS hard drive that spins at 10000 RPM and offers 300 GB of storage. It connects through a 6 Gb/s SAS interface and includes a 16 MB buffer. The drive is supplied in new condition.

Enterprise arrays and compatible servers

This drive suits enterprise storage arrays and servers that accept 2.5 inch SAS drives running at 6 Gb/s. It is not intended for systems that require a different physical interface or that need capacities larger than 300 GB.

6 Gb/s SAS interface

The single specification that decides compatibility is the 6 Gb/s SAS interface. The host system must provide a matching SAS controller and a 2.5 inch drive bay. Without that interface the drive cannot be installed or used.

Kohokohdat

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • 6 Gb/s SAS interface enables fast transfers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits dense bays

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Does my server need a SAS 6Gb/s backplane or controller card for the ST9300603SS to work?

Yes, the drive uses a 2.5" SAS 6Gb/s interface and requires a compatible SAS HBA, RAID controller or backplane that supports 6 Gbit/s signalling.

Can the 10000RPM SAS drive share a backplane with older 3Gb/s SAS disks?

The ST9300603SS negotiates down to 3Gb/s on a legacy backplane, so it will operate alongside older SAS drives, though at the slower link speed.

How do I confirm the 16MB cache and 6Gb/s link are active after installation?

Check the controller BIOS or OS utility (e.g. smartctl) for a reported 6Gb/s negotiated speed and 16MB cache size matching the drive label.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.