نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

Seagate

Seagate ST9300603SS 9FK066-006 300GB 10000RPM 2.5" SAS internal hard drive

SKU CH-7N48-VPB2E

A 300 GB 2.5" SAS drive spinning at 10000 RPM with a 16 MB cache for fast server storage

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • 6 Gb/s SAS interface enables fast transfers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits dense bays

300 GB 10000 RPM SAS drive

The Seagate ST9300603SS is a 2.5 inch SAS hard drive that spins at 10000 RPM and offers 300 GB of storage. It connects through a 6 Gb/s SAS interface and includes a 16 MB buffer. The drive is supplied in new condition.

Enterprise arrays and compatible servers

This drive suits enterprise storage arrays and servers that accept 2.5 inch SAS drives running at 6 Gb/s. It is not intended for systems that require a different physical interface or that need capacities larger than 300 GB.

6 Gb/s SAS interface

The single specification that decides compatibility is the 6 Gb/s SAS interface. The host system must provide a matching SAS controller and a 2.5 inch drive bay. Without that interface the drive cannot be installed or used.

أبرز المميزات

  • 300 GB capacity stores large datasets
  • 10 000 RPM spindle accelerates data access
  • 6 Gb/s SAS interface enables fast transfers
  • 16 MB cache buffers burst workloads
  • 5 inch form factor fits dense bays

المواصفات

لا توجد مواصفات منشورة لهذا المنتج بعد.

أسئلة حول هذا المنتج

Does my server need a SAS 6Gb/s backplane or controller card for the ST9300603SS to work?

Yes, the drive uses a 2.5" SAS 6Gb/s interface and requires a compatible SAS HBA, RAID controller or backplane that supports 6 Gbit/s signalling.

Can the 10000RPM SAS drive share a backplane with older 3Gb/s SAS disks?

The ST9300603SS negotiates down to 3Gb/s on a legacy backplane, so it will operate alongside older SAS drives, though at the slower link speed.

How do I confirm the 16MB cache and 6Gb/s link are active after installation?

Check the controller BIOS or OS utility (e.g. smartctl) for a reported 6Gb/s negotiated speed and 16MB cache size matching the drive label.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.