Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact black Mini-ITX case with aluminium unibody frame, no side window, front USB and audio ports

Silverstone

Silverstone SST-FTZ01B-E Fortress Mini-ITX PC case

SKU CH-BQAJ-ZAJJ9 MPN SST-FTZ01B-E

Holds Mini-ITX or Mini-DTX boards, fits 330 mm GPUs and 150 mm PSUs in an aluminum unibody frame with two included 120 mm fans

  • TypeMini-ITX
  • ColorBlack
  • Case MaterialAluminum unibody frame, steel chassis
  • With Power SupplyNo
  • Power Supply MountedRear
  • Motherboard CompatibilityMini DTX / Mini ITX
  • Compact build fits Mini-ITX and Mini-DTX boards
  • Two included 120 mm fans run at 1500 rpm and 18 dBA
  • Front panel offers two USB 3.0 ports plus audio and mic jacks
  • Aluminium unibody frame with steel chassis keeps weight to 9.26 lbs
  • Holds graphics cards up to 13 in long and 5.88 in wide

Compact Mini-ITX chassis with GPU headroom

The SilverStone Fortress SST-FTZ01B-E is a Mini-ITX case built around an aluminum unibody frame and steel chassis. It targets builders who want a slim, console-style enclosure that still accepts full-length graphics cards. The design omits a side window for a clean, understated look. Two included 120mm fans provide baseline airflow out of the box.

GPU length and cooler height set the build limits

A graphics card up to 13 inches (330mm) long and 5.88 inches (149mm) wide fits inside, but the CPU cooler cannot exceed 83mm in height. The power supply mount at the rear accepts ATX units up to 150mm long. Only two expansion slots are available, so dual-slot cards consume both. Four internal 2.5-inch drive bays handle SSD storage, while 3.5-inch drives are not supported.

Included 120mm fans define the thermal baseline

Two 120mm fans rated at 1500rpm and 18dBA ship with the case, one mounted at the top and one at the bottom. Additional bottom slots accept a second 120mm fan if extra intake is desired. Front I/O supplies two USB 3.0 ports, audio and microphone jacks. The chassis measures 4.21 by 14.80 by 13.82 inches and weighs 9.26 lbs.

Kohokohdat

  • Compact build fits Mini-ITX and Mini-DTX boards
  • Two included 120 mm fans run at 1500 rpm and 18 dBA
  • Front panel offers two USB 3.0 ports plus audio and mic jacks
  • Aluminium unibody frame with steel chassis keeps weight to 9.26 lbs
  • Holds graphics cards up to 13 in long and 5.88 in wide

Tekniset tiedot

BrandSilverStone
SeriesFortress Series
ModelSST-FTZ01B-E
TypeMini-ITX
ColorBlack
Case MaterialAluminum unibody frame, steel chassis
With Power SupplyNo
Power Supply MountedRear
Motherboard CompatibilityMini DTX / Mini ITX
Side Panelwithout Side Window
Internal 2.5" Drive Bays4
Expansion Slots2
Front Ports2 x USB 3.0 / 1 x Audio / 1 x MIC
Fan OptionsTop: 1 x 120mm fan, 1500rpm 18dBA (included)
Bottom: 2 x 120mm fan slot (1 x 120mm fan, 1500rpm 18dBA included)
Max GPU LengthSupport graphics card up to 13" (330mm), width restriction - 5.88" (149mm)
Max CPU Cooler Height83 mm
Max PSU Length150 mm
Dimensions4.21" x 14.80" x 13.82"
Weight9.26 lbs.
FeaturesClassic exterior built from aluminum unibody frame
Support cards up to 13 inches (330mm) to fit most high-end GPUs for compute power far exceeding consoles
Mini-ITX motherboard & ATX PSU compatible for wide array of building possibilities
Maximum performance in slim form factor with support for AIO liquid cooling
Positive air pressure design for excellent cooling/quietness and dust-prevention
Fits in nearly any environment with horizontal or vertical orientation
Lähetyspaino5.78 kg
Pakkauksen mitat442 × 427 × 180 mm

Kysymyksiä tästä tuotteesta

Should I pick the Mini-DTX or Mini-ITX motherboard option for this Fortress case?

Both Mini-DTX and Mini-ITX boards fit the chassis; choose Mini-DTX only if you need the extra expansion slot that the longer board provides, otherwise Mini-ITX is the standard choice.

What does the 330 mm GPU length limit mean when I install a card?

You can fit graphics cards up to 13 inches long, but the 149 mm width restriction rules out the thickest triple-slot models even if they meet the length figure.

How do the front USB 3.0 ports connect to the motherboard inside the case?

The two USB 3.0 ports route to a standard 19-pin internal header on the motherboard; if your board lacks that header you will need an adapter or a rear-I/O solution.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.