Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact black Mini-ITX case with aluminium unibody frame, no side window, front USB and audio ports

Silverstone

Silverstone SST-FTZ01B-E Fortress Mini-ITX PC case

SKU CH-BQAJ-ZAJJ9 MPN SST-FTZ01B-E

Holds Mini-ITX or Mini-DTX boards, fits 330 mm GPUs and 150 mm PSUs in an aluminum unibody frame with two included 120 mm fans

  • TypeMini-ITX
  • ColorBlack
  • Case MaterialAluminum unibody frame, steel chassis
  • With Power SupplyNo
  • Power Supply MountedRear
  • Motherboard CompatibilityMini DTX / Mini ITX
  • Compact build fits Mini-ITX and Mini-DTX boards
  • Two included 120 mm fans run at 1500 rpm and 18 dBA
  • Front panel offers two USB 3.0 ports plus audio and mic jacks
  • Aluminium unibody frame with steel chassis keeps weight to 9.26 lbs
  • Holds graphics cards up to 13 in long and 5.88 in wide

Compact Mini-ITX chassis with GPU headroom

The SilverStone Fortress SST-FTZ01B-E is a Mini-ITX case built around an aluminum unibody frame and steel chassis. It targets builders who want a slim, console-style enclosure that still accepts full-length graphics cards. The design omits a side window for a clean, understated look. Two included 120mm fans provide baseline airflow out of the box.

GPU length and cooler height set the build limits

A graphics card up to 13 inches (330mm) long and 5.88 inches (149mm) wide fits inside, but the CPU cooler cannot exceed 83mm in height. The power supply mount at the rear accepts ATX units up to 150mm long. Only two expansion slots are available, so dual-slot cards consume both. Four internal 2.5-inch drive bays handle SSD storage, while 3.5-inch drives are not supported.

Included 120mm fans define the thermal baseline

Two 120mm fans rated at 1500rpm and 18dBA ship with the case, one mounted at the top and one at the bottom. Additional bottom slots accept a second 120mm fan if extra intake is desired. Front I/O supplies two USB 3.0 ports, audio and microphone jacks. The chassis measures 4.21 by 14.80 by 13.82 inches and weighs 9.26 lbs.

Přednosti

  • Compact build fits Mini-ITX and Mini-DTX boards
  • Two included 120 mm fans run at 1500 rpm and 18 dBA
  • Front panel offers two USB 3.0 ports plus audio and mic jacks
  • Aluminium unibody frame with steel chassis keeps weight to 9.26 lbs
  • Holds graphics cards up to 13 in long and 5.88 in wide

Specifikace

BrandSilverStone
SeriesFortress Series
ModelSST-FTZ01B-E
TypeMini-ITX
ColorBlack
Case MaterialAluminum unibody frame, steel chassis
With Power SupplyNo
Power Supply MountedRear
Motherboard CompatibilityMini DTX / Mini ITX
Side Panelwithout Side Window
Internal 2.5" Drive Bays4
Expansion Slots2
Front Ports2 x USB 3.0 / 1 x Audio / 1 x MIC
Fan OptionsTop: 1 x 120mm fan, 1500rpm 18dBA (included)
Bottom: 2 x 120mm fan slot (1 x 120mm fan, 1500rpm 18dBA included)
Max GPU LengthSupport graphics card up to 13" (330mm), width restriction - 5.88" (149mm)
Max CPU Cooler Height83 mm
Max PSU Length150 mm
Dimensions4.21" x 14.80" x 13.82"
Weight9.26 lbs.
FeaturesClassic exterior built from aluminum unibody frame
Support cards up to 13 inches (330mm) to fit most high-end GPUs for compute power far exceeding consoles
Mini-ITX motherboard & ATX PSU compatible for wide array of building possibilities
Maximum performance in slim form factor with support for AIO liquid cooling
Positive air pressure design for excellent cooling/quietness and dust-prevention
Fits in nearly any environment with horizontal or vertical orientation
Přepravní hmotnost5.78 kg
Rozměry balení442 × 427 × 180 mm

Otázky k tomuto produktu

Should I pick the Mini-DTX or Mini-ITX motherboard option for this Fortress case?

Both Mini-DTX and Mini-ITX boards fit the chassis; choose Mini-DTX only if you need the extra expansion slot that the longer board provides, otherwise Mini-ITX is the standard choice.

What does the 330 mm GPU length limit mean when I install a card?

You can fit graphics cards up to 13 inches long, but the 149 mm width restriction rules out the thickest triple-slot models even if they meet the length figure.

How do the front USB 3.0 ports connect to the motherboard inside the case?

The two USB 3.0 ports route to a standard 19-pin internal header on the motherboard; if your board lacks that header you will need an adapter or a rear-I/O solution.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.