Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Simmtec, Inc

Simmtec, Inc 32GB (4x 8GB) DDR3 1600MHz Desktop RAM with Black Heatspreaders

SKU CH-NY1H-QFHP5

32 GB kit of four 8 GB DDR3-1600 DIMMs with 11-11-11-28 timings, 1.5 V operation and black heatspreaders

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32 GB capacity in four 8 GB modules for high-density desktop upgrades
  • 1600 MHz DDR3 speed rated at PC3-12800 for responsive system performance
  • 11-11-11-28 CAS latency timings for stable data access
  • Black heatspreaders on each DIMM for improved thermal dissipation
  • XMP ready 1.5 V unbuffered non-ECC design validated for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms

32GB DDR3 1600MHz Kit

This 32GB kit contains four 8GB DDR3 DIMMs rated at 1600MHz with PC3-12800 bandwidth. Black heatspreaders cover each module, and the set runs at standard 1.5V with 11-11-11-28 timings. XMP support allows simple configuration on compatible motherboards.

Ideal for Older Intel and AMD Platforms

The modules are designed for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano and FM1 platforms. Unbuffered, non-ECC operation suits standard desktop workloads. Builders needing ECC, registered memory, or different pin counts should look elsewhere.

240-Pin DDR3 Interface

The kit uses the 240-pin DDR3 form factor, which determines physical and electrical compatibility with the motherboard. Verify the board specifies DDR3 240-pin slots before purchasing.

Kohokohdat

  • 32 GB capacity in four 8 GB modules for high-density desktop upgrades
  • 1600 MHz DDR3 speed rated at PC3-12800 for responsive system performance
  • 11-11-11-28 CAS latency timings for stable data access
  • Black heatspreaders on each DIMM for improved thermal dissipation
  • XMP ready 1.5 V unbuffered non-ECC design validated for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms

Tekniset tiedot

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)

Kysymyksiä tästä tuotteesta

Will the 1600MHz DDR3 speed hold under sustained load?

The modules run at 1600MHz (PC3-12800) with 11-11-11-28 timings at 1.5V; XMP is ready for automatic configuration on supported boards.

How hot and loud do the black heatspreaders get during all-day use?

Black heatspreaders passively dissipate heat from the DDR3 chips; there are no fans, so the kit adds no audible noise while keeping temperatures in check.

Which motherboard sockets must I already have for this 240-pin kit to work?

Designed for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms; requires a DDR3 240-pin DIMM slot.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.