Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

Simmtec, Inc

Simmtec, Inc 32GB (4x 8GB) DDR3 1600MHz Desktop RAM with Black Heatspreaders

SKU CH-NY1H-QFHP5

32 GB kit of four 8 GB DDR3-1600 DIMMs with 11-11-11-28 timings, 1.5 V operation and black heatspreaders

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1600 (PC3 12800)
  • 32 GB capacity in four 8 GB modules for high-density desktop upgrades
  • 1600 MHz DDR3 speed rated at PC3-12800 for responsive system performance
  • 11-11-11-28 CAS latency timings for stable data access
  • Black heatspreaders on each DIMM for improved thermal dissipation
  • XMP ready 1.5 V unbuffered non-ECC design validated for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms

32GB DDR3 1600MHz Kit

This 32GB kit contains four 8GB DDR3 DIMMs rated at 1600MHz with PC3-12800 bandwidth. Black heatspreaders cover each module, and the set runs at standard 1.5V with 11-11-11-28 timings. XMP support allows simple configuration on compatible motherboards.

Ideal for Older Intel and AMD Platforms

The modules are designed for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano and FM1 platforms. Unbuffered, non-ECC operation suits standard desktop workloads. Builders needing ECC, registered memory, or different pin counts should look elsewhere.

240-Pin DDR3 Interface

The kit uses the 240-pin DDR3 form factor, which determines physical and electrical compatibility with the motherboard. Verify the board specifies DDR3 240-pin slots before purchasing.

Najważniejsze cechy

  • 32 GB capacity in four 8 GB modules for high-density desktop upgrades
  • 1600 MHz DDR3 speed rated at PC3-12800 for responsive system performance
  • 11-11-11-28 CAS latency timings for stable data access
  • Black heatspreaders on each DIMM for improved thermal dissipation
  • XMP ready 1.5 V unbuffered non-ECC design validated for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms

Specyfikacja

Capacity32GB (4 x 8GB)
SpeedDDR3 1600 (PC3 12800)

Pytania dotyczące tego produktu

Will the 1600MHz DDR3 speed hold under sustained load?

The modules run at 1600MHz (PC3-12800) with 11-11-11-28 timings at 1.5V; XMP is ready for automatic configuration on supported boards.

How hot and loud do the black heatspreaders get during all-day use?

Black heatspreaders passively dissipate heat from the DDR3 chips; there are no fans, so the kit adds no audible noise while keeping temperatures in check.

Which motherboard sockets must I already have for this 240-pin kit to work?

Designed for Intel LGA 1155, 1156, 1366, 2011 and AMD AM3, AM3+, Llano, FM1 platforms; requires a DDR3 240-pin DIMM slot.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.