Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Simmtec, Inc

Simmtec, Inc 8GB (2 x 4GB) DDR3 1333 desktop RAM

SKU CH-367H-7Q03B

DDR3 desktop memory kit delivering 8 GB across two 4 GB modules at 1333 MHz with 9-9-9-25 timings and 1.5 V operation

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • 8 GB total capacity from two 4 GB modules
  • 1333 MHz DDR3 speed rated at PC3 10600
  • 9-9-9-25 latency timings for stable operation
  • 5 V operating voltage matches standard DDR3 spec
  • 240-pin DIMM form factor fits desktop motherboards

8GB DDR3 1333 Desktop Kit

This kit provides 8 GB of desktop memory as two 4 GB DIMMs running at 1333 MT/s. It uses the DDR3 standard with a 240-pin form factor and operates at 1.5 V. The modules are tested before shipping to reduce the risk of errors.

Buyers upgrading older DDR3 platforms

This memory suits systems that accept DDR3 1333 DIMMs and have two free slots for a dual-channel kit. Builders whose boards need a different speed, voltage or pin count should look at other options.

9-9-9-25 CAS latency

The rated timings are 9-9-9-25 at the default 1333 MT/s speed. This figure determines whether the modules meet the timing requirements of a specific motherboard or memory controller.

Kohokohdat

  • 8 GB total capacity from two 4 GB modules
  • 1333 MHz DDR3 speed rated at PC3 10600
  • 9-9-9-25 latency timings for stable operation
  • 5 V operating voltage matches standard DDR3 spec
  • 240-pin DIMM form factor fits desktop motherboards

Tekniset tiedot

Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)

Kysymyksiä tästä tuotteesta

Will the 240-pin DIMMs need replacement after a certain number of insertions?

The 240-pin DDR3 DIMMs are solid-state modules with no moving parts, so they do not wear out from insertion cycles; replacement is only needed if a module fails or a platform upgrade requires a different memory generation.

What limit appears first when the kit runs continuously at 1333 MHz?

The 9-9-9-25 latency timings and 1.5 V operating voltage set the electrical ceiling; sustained loads will hit thermal or stability limits defined by those parameters before any other bottleneck.

How much heat and power does the 8 GB kit produce during all-day operation?

Each 4 GB module runs at 1.5 V, so the pair draws modest power and generates low heat typical for DDR3 1333 parts; standard case airflow is usually sufficient to keep temperatures in check.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.