Simmtec, Inc
Simmtec, Inc 8GB (2 x 4GB) DDR3 1333 desktop RAM
DDR3 desktop memory kit delivering 8 GB across two 4 GB modules at 1333 MHz with 9-9-9-25 timings and 1.5 V operation
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- 8 GB total capacity from two 4 GB modules
- 1333 MHz DDR3 speed rated at PC3 10600
- 9-9-9-25 latency timings for stable operation
- 5 V operating voltage matches standard DDR3 spec
- 240-pin DIMM form factor fits desktop motherboards
8GB DDR3 1333 Desktop Kit
This kit provides 8 GB of desktop memory as two 4 GB DIMMs running at 1333 MT/s. It uses the DDR3 standard with a 240-pin form factor and operates at 1.5 V. The modules are tested before shipping to reduce the risk of errors.
Buyers upgrading older DDR3 platforms
This memory suits systems that accept DDR3 1333 DIMMs and have two free slots for a dual-channel kit. Builders whose boards need a different speed, voltage or pin count should look at other options.
9-9-9-25 CAS latency
The rated timings are 9-9-9-25 at the default 1333 MT/s speed. This figure determines whether the modules meet the timing requirements of a specific motherboard or memory controller.
Points forts
- 8 GB total capacity from two 4 GB modules
- 1333 MHz DDR3 speed rated at PC3 10600
- 9-9-9-25 latency timings for stable operation
- 5 V operating voltage matches standard DDR3 spec
- 240-pin DIMM form factor fits desktop motherboards
Caractéristiques
| Capacity | 8GB (2 x 4GB) |
|---|---|
| Speed | DDR3 1333 (PC3 10600) |
Questions sur cet article
Will the 240-pin DIMMs need replacement after a certain number of insertions?
The 240-pin DDR3 DIMMs are solid-state modules with no moving parts, so they do not wear out from insertion cycles; replacement is only needed if a module fails or a platform upgrade requires a different memory generation.
What limit appears first when the kit runs continuously at 1333 MHz?
The 9-9-9-25 latency timings and 1.5 V operating voltage set the electrical ceiling; sustained loads will hit thermal or stability limits defined by those parameters before any other bottleneck.
How much heat and power does the 8 GB kit produce during all-day operation?
Each 4 GB module runs at 1.5 V, so the pair draws modest power and generates low heat typical for DDR3 1333 parts; standard case airflow is usually sufficient to keep temperatures in check.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



