Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Solidigm

Solidigm D7-P5520 7.68TB E1.S 9.5mm enterprise SSD SSDPFUKX076T11Z

SKU CH-X2G8-62K8S MPN SSDPFUKX076T11Z

E1.S 9.5mm enterprise SSD delivering 7.68TB capacity with PCIe 4.0 speeds up to 6600 MB/s read and 4200 MB/s write

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 4200 MBps
  • High-capacity storage with 7.68TB in a compact E1.S 9.5mm form factor
  • Fast sequential reads up to 6600 MBps via PCI-Express 4.0 x4 interface
  • High random read performance reaching 1100000 IOPS for demanding workloads
  • Enterprise-grade endurance rated at 14.0 PBW with 2000000 hours MTBF
  • Efficient power use at 5W idle and 18W active for dense server deployments

Solidigm D7-P5520 7.68TB E1.S

This Solidigm D7-P5520 enterprise SSD provides 7.68TB of capacity in an E1.S 9.5mm form factor using 144L TLC 3D NAND. It is built for data-centre servers that need high-density read-intensive storage with a PCI-Express 4.0 interface. The drive delivers up to 6600 MBps sequential read and 4200 MBps sequential write speeds. It is not suited for systems that lack an E1.S backplane or that require a different physical height.

E1.S 9.5mm PCIe 4.0 x4 integration

The drive slots directly into an E1.S 9.5mm cage, freeing traditional 2.5-inch or M.2 bays for other devices. Its PCI-Express 4.0 x4 electrical interface supports 1100000 IOPS random read and 220000 IOPS random write performance without a separate power cable. Builders without an EDSFF backplane cannot install this module, and no adapter is included in the single pack.

18W active power and vibration tolerance

Active power draw reaches 18W while idle consumption sits at 5W, so system cooling must accommodate that thermal load. The drive tolerates 2.17 GRMS operating vibration from 5 to 700 Hz and 3.13 GRMS non-operating vibration up to 800 Hz. It withstands 1000 G shock at 0.5 msec and carries a 2000000-hour MTBF rating with 14.0 PBW endurance.

Kohokohdat

  • High-capacity storage with 7.68TB in a compact E1.S 9.5mm form factor
  • Fast sequential reads up to 6600 MBps via PCI-Express 4.0 x4 interface
  • High random read performance reaching 1100000 IOPS for demanding workloads
  • Enterprise-grade endurance rated at 14.0 PBW with 2000000 hours MTBF
  • Efficient power use at 5W idle and 18W active for dense server deployments

Tekniset tiedot

BrandSolidigm
ModelD7-P5520
Part NumberSSDPFUKX076T11Z
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 4200 MBps
4KB Random Read1100000 IOPS (4K Blocks)
4KB Random Write220000 IOPS (4K Blocks)
Endurance14.0 PBW
MTBF2,000,000 hours
Power Consumption (Idle)5W
Power Consumption (Active)18W
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight72g +/- 5g
Lähetyspaino0.17 kg
Pakkauksen mitat140 × 110 × 17 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much data can the 7.68TB D7-P5520 write before reaching its endurance limit?

The drive is rated for 14.0 PBW of total bytes written over its lifetime.

What is the active power draw of the E1.S 9.5mm SSD during continuous operation?

Active power consumption is specified at 18W when the drive is under load.

Does the SSDPFUKX076T11Z require a PCIe 4.0 x4 slot to function?

Yes, it uses a PCI-Express 4.0 x4 interface and needs a compatible E1.S 9.5mm bay.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.