Solidigm
Solidigm D7-P5520 1.92TB E1.S 15mm enterprise SSD SSDPFVKX019T11Z
- E1.S 15mm
- 1.92TB
1 504,99 $
0.01872251BTC
Varastossa
Solidigm
Solidigm D7-P5520 SSDPFUKX019T11Z 1.92TB E1.S 9.5mm enterprise SSD
A 1.92TB E1.S 9.5mm enterprise SSD using 3D TLC and a PCI-Express 4.0 x4 interface
- Form FactorE1.S 9.5mm
- Capacity1.92TB
- Memory Components3D TLC
- InterfacePCI-Express 4.0 x4
Option 1.92TB E1.S 9.5mm
- 1.92TB E1.S 9.5mm
- 1.92TB E1.S 15mm
- 1.92TB U.2
- 1.92TB U.2 FIPS
- 1.92TB U.2 Opal
- 3.84TB E1.S 15mm
- 3.84TB E1.S 9.5mm
- 3.84TB U.2
- 3.84TB U.2 FIPS
- 3.84TB U.2 Opal
- 7.68TB E1.S 15mm
- 7.68TB E1.S 9.5mm
Näytä 7 muuta kokoonpanoa
- E1.S 9.5mm form factor fits dense server bays
- 92TB capacity stores large enterprise datasets
- PCI-Express 4.0 x4 interface delivers high throughput
- 3D TLC memory balances endurance with cost efficiency
- D7-P5520 series built for read-intensive workloads
1.92TB E1.S enterprise SSD
The Solidigm D7-P5520 SSDPFUKX019T11Z delivers 1.92TB of 3D TLC storage in a 9.5mm E1.S form factor. It connects through a PCI-Express 4.0 x4 interface for server and storage-array workloads. The drive is sold new and targets IT teams that need high-density flash in a compact enterprise slot.
Installation notes
The E1.S 9.5mm module slides into a compatible hot-plug cage and locks with the standard latch. No cables are required, but the chassis must provide the correct keying and PCIe lane allocation. A common issue is inserting the drive into a slot wired for a different form factor or generation, which prevents the link from training.
Pre-order checklist
Verify that your server or enclosure lists E1.S 9.5mm support and maps PCI-Express 4.0 x4 lanes to the intended bay. Confirm the backplane supplies the required power envelope for a 3D TLC enterprise drive. Ensure the system firmware recognises the D7-P5520 series before deployment.
Kohokohdat
- E1.S 9.5mm form factor fits dense server bays
- 92TB capacity stores large enterprise datasets
- PCI-Express 4.0 x4 interface delivers high throughput
- 3D TLC memory balances endurance with cost efficiency
- D7-P5520 series built for read-intensive workloads
Tekniset tiedot
| Brand | Solidigm |
|---|---|
| Series | D7-P5520 |
| Model | SSDPFUKX019T11Z |
| Form Factor | E1.S 9.5mm |
| Capacity | 1.92TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0 x4 |
| Lähetyspaino | 0.91 kg |
| Pakkauksen mitat | 203 × 152 × 76 mm |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Solidigm
Solidigm D7-P5520 1.92TB U.2 15mm enterprise SSD SSDPF2KX019T1GF
- U.2 15mm
- 1.92TB
1 599,99 $
0.01990433BTC
Varastossa
Solidigm
Solidigm D7-P5520 1.92TB U.2 15mm enterprise SSD SSDPF2KX019T1OZ
- U.2 15mm
- 1.92TB
1 713,99 $
0.02132253BTC
Varastossa
Solidigm
Solidigm D7-P5520 SSDPFUKX038T11Z 3.84TB E1.S enterprise SSD
- E1.S 9.5mm
- 3.84TB
2 516,99 $
0.03131208BTC
Varastossa
Solidigm
Solidigm D7-P5520 3.84TB U.2 15mm enterprise SSD SSDPF2KX038T1GF
- U.2 15mm
- 3.84TB
2 593,99 $
0.03226998BTC
VarastossaKysymyksiä tästä tuotteesta
How can I confirm the D7-P5520 SSDPFUKX019T11Z is operating correctly after installation?
Verify the drive appears in the system BIOS or OS disk utility at its full 1.92TB capacity and that the link speed shows PCI-Express 4.0 x4.
What comes with the SSDPFUKX019T11Z and what must I source separately?
The package contains the 1.92TB E1.S 9.5mm drive only; a compatible E1.S backplane or carrier, mounting screws and any required cabling are not included.
Which capacity in the D7-P5520 E1.S 9.5mm line should I choose for a 1.92TB requirement?
Select this SSDPFUKX019T11Z model; it is the specific 1.92TB variant in the D7-P5520 series with 3D TLC memory and PCI-Express 4.0 x4 interface.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
