Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Solidigm

Solidigm D7-PS1010 1.92TB U.2 15mm PCIe 5.0 enterprise SSD SB5PH27X019TOP1

SKU CH-3QKD-C7M28 MPN SB5PH27X019TOP1

U.2 15mm PCIe 5.0 enterprise SSD delivering 1.92TB capacity with 14500 MBps sequential read, 4100 MBps write and 1 DWPD endurance

  • Form FactorU.2 15mm
  • Capacity1.92TB
  • Memory Components176L TLC 3D NAND
  • InterfacePCI-Express 5.0
  • Max Sequential ReadUp to 14500 MBps
  • Max Sequential WriteUp to 4100 MBps
  • Delivers up to 14500 MBps sequential read for rapid data access
  • Sustains 2750000 IOPS random read to accelerate transaction-heavy workloads
  • Handles 380000 IOPS random write for consistent mixed-use performance
  • Endures 28 PBW at 1 DWPD for long service life
  • Secures data with Opal encryption on 176L TLC 3D NAND

Capacity and interface

The Solidigm D7-PS1010 is a 1.92TB enterprise SSD built on 176L TLC 3D NAND with a PCIe 5.0 x4 interface. It delivers up to 14500 MBps sequential read and 4100 MBps sequential write alongside 2750000 IOPS random read and 380000 IOPS random write. The drive is rated for 1 DWPD endurance and 28 PBW total bytes written.

Physical installation

The U.2 15mm form factor fits standard 2.5in U.2 bays and backplanes that accept a 15mm z-height; verify the bay depth before fitting. Active power draw reaches 23W, so ensure the backplane or cabling can supply the required current without voltage drop. The drive weighs 120g and operates from 0°C to 77°C.

Pre-order checks

Confirm the server or storage platform supports PCIe 5.0 signalling over U.2 and that the BIOS or firmware can boot from this device if required. Opal security is supported for hardware-based encryption management. The MTBF is 2500000 hours and the drive meets 1000 G shock plus 2.17 GRMS operating vibration specifications.

Kohokohdat

  • Delivers up to 14500 MBps sequential read for rapid data access
  • Sustains 2750000 IOPS random read to accelerate transaction-heavy workloads
  • Handles 380000 IOPS random write for consistent mixed-use performance
  • Endures 28 PBW at 1 DWPD for long service life
  • Secures data with Opal encryption on 176L TLC 3D NAND

Tekniset tiedot

BrandSolidigm
ModelD7-PS1010
Part NumberSB5PH27X019TOP1
Form FactorU.2 15mm
Capacity1.92TB
Memory Components176L TLC 3D NAND
InterfacePCI-Express 5.0
Max Sequential ReadUp to 14500 MBps
Max Sequential WriteUp to 4100 MBps
4KB Random Read2750000 IOPS (4K Blocks)
4KB Random Write380000 IOPS (4K Blocks)
Endurance1 DWPD / 28 PBW
MTBF2,500,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)23W
Operating Temperature0°C to 77°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight120g +/- 10g
Lähetyspaino0.16 kg
Pakkauksen mitat128 × 102 × 25 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the Solidigm D7-PS1010 is delivering its rated 2750000 IOPS random read performance after installation?

Run a 4K random read benchmark such as FIO or CrystalDiskMark on the U.2 15mm drive; sustained results near 2750000 IOPS confirm the PCIe 5.0 x4 link and 176L TLC NAND are operating as specified.

What ships with the SB5PH27X019TOP1 and what must I source separately for a server deployment?

The single pack contains only the 1.92TB U.2 15mm SSD; you must supply a compatible 2.5-inch U.2 backplane or carrier, PCIe 5.0 cabling, and any required mounting screws for your chassis.

Which capacity and endurance tier of the D7-PS1010 series should I select for a mixed read-write workload needing 28 PBW?

The 1.92TB model provides exactly 1 DWPD and 28 PBW total bytes written, matching the stated endurance target for balanced enterprise workloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.