Solidigm D7-PS1010 7.68TB E1.S 9.5mm PCIe 5.0 x4 enterprise SSD SB5PHU7X076TOP1
- E1.S 9.5mm
- 7.68TB
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Solidigm
E3.S 7.5mm drive stores 15.36TB on 176L TLC NAND with PCIe 5.0 speeds up to 14500 MBps read and 9300 MBps write
Option 15.36TB E3.S FIPS
The Solidigm D7-PS1010 delivers 15.36TB of storage in an E3.S 7.5mm form factor built for PCIe 5.0 servers. It uses 176L TLC 3D NAND rated for 1 DWPD endurance and 28 PBW total bytes written. FIPS security compliance suits regulated data-centre workloads.
The 7.5mm E3.S design fits hot-plug drive bays in 1U and 2U chassis without adapters. A 120g weight keeps tray loading light while the x4 edge connector provides full PCIe 5.0 bandwidth. No cabling is required beyond the backplane slot.
Typical active draw reaches 23W while idle power sits at 5W. The controller operates from 0°C to 77°C with an MTBF of 2,500,000 hours. Shock tolerance is rated at 1,000 G and vibration at 2.17 GRMS operating.
| Brand | Solidigm |
|---|---|
| Model | D7-PS1010 |
| Part Number | SB5PHA7X153TOF1 |
| Form Factor | E3.S 7.5mm |
| Capacity | 15.36TB |
| Memory Components | 176L TLC 3D NAND |
| Interface | PCI-Express 5.0 |
| Max Sequential Read | Up to 14500 MBps |
| Max Sequential Write | Up to 9300 MBps |
| 4KB Random Read | 2750000 IOPS (4K Blocks) |
| 4KB Random Write | 380000 IOPS (4K Blocks) |
| Endurance | 1 DWPD / 28 PBW |
| MTBF | 2,500,000 hours |
| Security | FIPS |
| Power Consumption (Idle) | 5W |
| Power Consumption (Active) | 23W |
| Operating Temperature | 0°C to 77°C |
| Max Shock Resistance | 1,000 G (Max) at 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS (5 - 700 Hz) Max Non-Operating: 3.13 GRMS (5 - 800 Hz) Max |
| Weight | 120g +/- 10g |
| Lähetyspaino | 0.17 kg |
| Pakkauksen mitat | 140 × 110 × 17 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The PCIe 5.0 x4 link caps sequential throughput at the drive's rated 14500 MBps read and 9300 MBps write, with 2750000 IOPS random read and 380000 IOPS random write.
It fits a standard E3.S 7.5mm hot-plug bay; the drive weighs 120g +/- 10g and uses the bay's native latch, so no separate brackets or screws are needed.
Align the drive with the bay guide rails, push straight in until the connector seats fully, then engage the built-in latch; forcing it at an angle can bend the high-speed contacts.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?