Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 1U rack server chassis, four front 3.5 drive bays, dual 500W PSUs, no bezel or rails

Supermicro

Supermicro SYS-5019C-WR 1U rack server 1x Xeon E-2146G 128GB DDR4 9361-8i 2x 500W

SKU CH-EY5J-5KFP3

1U rack server with Xeon E-2146G, 128 GB DDR4, MegaRAID 9361-8i and dual 500 W platinum supplies

  • Type0
  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • AI FeaturesNo
  • CPU TypeIntel Xeon
  • CPU Speed0
  • 1U rackmount server fits dense data-centre deployments
  • Xeon E-2146G 6-core CPU reaches 4.5GHz turbo frequency
  • 128GB DDR4-2666 ECC memory ensures data integrity
  • MegaRAID 9361-8i controller manages eight SAS/SATA drives
  • Dual 500W 80 Plus Platinum PSUs deliver redundant power

1U rack server for enterprise workloads

This 1U rackmount system ships with a single Intel Xeon E-2146G six-core processor running at 3.5 GHz with a 4.5 GHz turbo frequency. It includes 128 GB of DDR4-2666 ECC unbuffered memory across four DIMM slots. The platform targets data-center and business-critical deployments that need compact density with redundant power.

LSI MegaRAID 9361-8i controller with 1 GB cache

Storage is managed by an eight-port SAS 12 Gb/s PCIe RAID controller that supports RAID 0, 1, 5 and 10. The card includes a 1 GB cache backed by a battery module to protect in-flight data during power loss. Four hot-swap 3.5-inch drive bays accept SATA or SAS media, while dual M.2 slots provide additional PCIe 3.0 x4 or SATA connectivity.

Redundant 500 W platinum supplies and IPMI 2.0

Two hot-swap 500 W 80 Plus Platinum power supplies deliver 96 percent efficiency and N+1 redundancy in a 1U chassis. A dedicated RJ45 IPMI 2.0 port with ASPEED AST2500 BMC enables KVM-over-LAN and virtual media for remote management. Expansion includes one PCIe 3.0 x16 or two x8 slots plus a PCIe 3.0 x4 in x8 slot. Front bezel and rack rails are not included.

Kohokohdat

  • 1U rackmount server fits dense data-centre deployments
  • Xeon E-2146G 6-core CPU reaches 4.5GHz turbo frequency
  • 128GB DDR4-2666 ECC memory ensures data integrity
  • MegaRAID 9361-8i controller manages eight SAS/SATA drives
  • Dual 500W 80 Plus Platinum PSUs deliver redundant power

Tekniset tiedot

BrandSUPERMICRO
SeriesCSE-815TQC-R504WB2
Model0
Part Number3.50 GHz
Type0
Rack Height1U
Redundant Hot-swap PowerYes
AI FeaturesNo
CPU TypeIntel Xeon
CPU Speed0
CPU SocketLGA 1151
Number of CPU Cores6-Core Processor
# of Processors InstalledE-2146G
MAX Processors0
Chipset0
Installed Memory Size128GB
Memory Type0
Max Memory Capacity0
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)0
Raid LevelRAID 0/1/5/6/10/50/60
Media Drives0
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerIntegrated Intel 210i-AT Dual Gigabit RJ45 Network Adapter
LAN Ports0
Expansion Slots0
Management PortRJ 45
Operating SystemNo
Features0

Kysymyksiä tästä tuotteesta

How does the 4.5 GHz turbo speed on the E-2146G behave once the server is under sustained load in a 1U chassis?

The six-core Xeon E-2146G runs at a 3.5 GHz base clock and can reach 4.5 GHz turbo when thermal headroom allows; the 1U form factor and dual 500 W Platinum supplies keep cooling capacity high, but prolonged all-core workloads will settle closer to the base frequency.

What practical throughput limit does the MegaRAID 9361-8i controller impose on the four 3.5-inch drive bays?

The 9361-8i provides eight 12 Gb/s SAS lanes backed by 1 GB cache with battery backup, so the four hot-swap bays can each run at full SATA 6 Gb/s or SAS 12 Gb/s without controller bottleneck.

What mounting hardware is required to install this 1U unit in a standard rack?

The chassis follows the CSE-815TQC-R504WB2 1U specification; front bezel and rack-mount rails are not included, so you must supply compatible slide rails and any cage nuts or screws your rack requires.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.