Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with twelve front 3.5-inch drive trays

Supermicro

Supermicro SYS-6028U-TR4T+ 2U rack server 2× Xeon E5-2660 v4 2.0 GHz 14-core 128 GB DDR4 12× 3.5″ bays

SKU CH-6VSK-H2DGQ

Dual 14-core Xeon 2U server with 128 GB DDR4, 12 hot-swap 3.5″ bays, MegaRAID 9361-8i, quad 10GBase-T and redundant 1000 W PSUs

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.00 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores14-Core Processor
  • Dual Xeon E5-2660 v4 processors deliver 28 total cores for heavy workloads
  • 128 GB DDR4 ECC memory supports large datasets and virtualization
  • Twelve 3.5″ hot-swap bays provide high-capacity SAS or SATA storage
  • Quad 10GBase-T ports via Intel X540 enable fast network throughput
  • Redundant 1000 W power supplies and IPMI 2.0 maximise uptime

Dual Xeon 14-core 2U server

The Supermicro SYS-6028U-TR4T+ is a 2U rackmount server built around two Intel Xeon E5-2660 v4 processors. Each CPU runs at 2.0 GHz with 14 cores and reaches 3.2 GHz turbo. The system ships with 128 GB of DDR4 2400 MHz registered ECC memory across eight 16 GB modules. It targets virtualization hosts, database nodes and compute clusters that need dense CPU cores and redundant power in a standard rack footprint.

Hot-swap bays and rail-less install

Twelve front-access 3.5″ drive trays accept SATA or SAS drives and connect to the MegaRAID 9361-8i controller with 1 GB battery-backed cache. The controller supports RAID 0, 1, 5, 6, 10, 50 and 60. Two hot-swap 1000 W titanium power supplies slide in from the rear. Front bezel and rack rails are not included, so you must source compatible rails for the CSE-829UAC chassis before mounting.

DDR4 capacity ceiling and 10G copper reach

The board provides 24 DIMM slots and supports up to 1.5 TB of DDR4 registered ECC memory, so the installed 128 GB leaves significant headroom. Quad 10GBase-T ports on the Intel X540 add-in card use RJ45 copper cabling with a 100 m distance limit. The dedicated IPMI 2.0 port shares the same copper medium for remote KVM and virtual media. Matrox G200 graphics with 8 MB video memory handle console output only.

Kohokohdat

  • Dual Xeon E5-2660 v4 processors deliver 28 total cores for heavy workloads
  • 128 GB DDR4 ECC memory supports large datasets and virtualization
  • Twelve 3.5″ hot-swap bays provide high-capacity SAS or SATA storage
  • Quad 10GBase-T ports via Intel X540 enable fast network throughput
  • Redundant 1000 W power supplies and IPMI 2.0 maximise uptime

Tekniset tiedot

BrandSUPERMICRO
SeriesCSE-829UAC-R1K02-T
ModelSYS-6028U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.00 GHz
CPU SocketLGA 2011-3
Number of CPU Cores14-Core Processor
# of Processors InstalledE5-2660 V4
Installed Memory Size128GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSuperMicro AOC-2UR-6-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features12 x 3.5" SATA/SAS Hot-Plug Drive Bays

Kysymyksiä tästä tuotteesta

How can I confirm the MegaRAID 9361-8i controller is active after setup?

Open the MegaRAID BIOS utility during boot or use StorCLI from the OS to see the 9361-8i listed with its 1 GB cache and battery backup unit reported healthy.

Which drive trays and rails are included, and what must I source separately?

Twelve 3.5″ SAS/SATA hot-swap trays are included; hard drives, front bezel and rack-mount rails are not supplied and must be purchased separately.

Should I choose the dual E5-2660 v4 14-core 2.0 GHz configuration or a different CPU option for this chassis?

This unit ships with two E5-2660 v4 14-core 2.0 GHz processors installed; the board supports the wider E5-2600 v3/v4 family if a different core count or frequency is required.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.