Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

The Perfect Part

The Perfect Part 50 Pairs Solar Cable Connectors Industrial Power Supply

SKU CH-AM72-38RRY

Fifty pairs of male and female solar cable connectors rated to 22 A at 2.5 mm² and 30 A at 4 mm² or 6 mm², with IP67 protection when mated and an operating range of -40 °C to +90 °C

  • TypeDC Power Supplies
  • Engine BrandThe Perfect Part
  • Starter TypeRecoil
  • MaterialPPO + ABS
  • Temperature Range-40 C ~ +90 C
  • Primary Openings1

Pack 50 Pairs

  • 50-pair pack covers large solar installs
  • Silver-plated copper contacts cut resistance to 0.2 mm
  • IP67 rating seals out dust and water when mated
  • Operates from -40 °C to +90 °C in extreme climates
  • UL94-V0 or UL94-5VA flame class resists fire spread

50-Pair Solar Cable Connectors

This pack contains 50 male and female connector pairs built for photovoltaic installations. The housings use PPO plus ABS with PC/PA black insulation rated to UL94-V0 or UL94-5VA flame class. Copper contacts are silver-plated and accept 2.5, 4 and 6 mm² cables corresponding to 14, 12 and 10 AWG. Rated current reaches 22 A on 2.5 mm² and 30 A on 4 to 6 mm² conductors.

Upgrade From Screw Terminals

Installers moving from basic screw terminals gain IP67 sealing when mated and IP2X protection unmated. The 4.0 mm pin diameter and 50 N insertion force give a positive lock that resists vibration in roof-mounted arrays. The wide temperature range of -40 C to +90 C suits year-round outdoor exposure without seasonal replacement cycles.

For Professional Solar Arrays

These connectors suit contractors wiring residential or commercial PV strings who need code-compliant flame ratings and consistent contact resistance of 0.2 mm. Builders requiring tool-less assembly or higher voltage ratings should verify specifications against local electrical codes before purchase. The 50-pair quantity matches typical string-inverter projects.

Kohokohdat

  • 50-pair pack covers large solar installs
  • Silver-plated copper contacts cut resistance to 0.2 mm
  • IP67 rating seals out dust and water when mated
  • Operates from -40 °C to +90 °C in extreme climates
  • UL94-V0 or UL94-5VA flame class resists fire spread

Tekniset tiedot

TypeDC Power Supplies
Engine BrandThe Perfect Part
Starter TypeRecoil
MaterialPPO + ABS
Temperature Range-40 C ~ +90 C
Primary Openings1
Secondary Openings1
Wire TypeAI
Features50-pack; Color: Black; Material: PPO + ABS; Insulation Material: PC/PA, black

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What cable cross-sections fit the 4.0 mm pins on these connectors?

The 4.0 mm pins accept 2.5 mm², 4 mm² and 6 mm² cables, corresponding to AWG14, AWG12 and AWG10.

Which crimp step is most often missed when assembling a male-female pair?

After crimping the silver-plated copper contact, the insulator must be fully seated until it clicks; a loose insulator breaks the IP67 seal when mated.

When should a connector from this 50-pair pack be replaced?

Replace any unit showing melted PPO/ABS housing, cracked PC/PA insulation or contact resistance above 0.2 mm, as these indicate overheating or UV damage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.