Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
One hundred pairs of black 4.0 mm solar cable connectors, male and female, PPO plus ABS bodies with PC/PA insulation

The Perfect Part

The Perfect Part Solar Cable Connectors 100 Pairs 4.0 mm

SKU CH-2XE4-K69EH

A 100-pair set of 4.0 mm solar cable connectors rated to 30 A, IP67 mated and UL94-V0 flame class for outdoor PV systems

  • TypeDC Power Supplies
  • Engine BrandThe Perfect Part
  • Starter TypeRecoil
  • MaterialPPO + ABS
  • Temperature Range-40 C ~ +90 C
  • Primary Openings1

Pack 100 Pairs

  • 100 pairs in one pack cover large installations
  • Silver-plated copper contacts keep resistance low at 0.2 mΩ
  • IP67 rating when mated seals out dust and water
  • Operates from -40 °C to +90 °C in harsh outdoor climates
  • UL94-V0 or UL94-5VA flame class limits fire risk

Solar Connector Kit 100 Pairs

This pack contains one hundred male and female connector pairs built for photovoltaic cable terminations. The 4.0 mm pin diameter suits 2.5 mm², 4 mm² and 6 mm² conductors, covering 14 AWG to 10 AWG wire sizes. Silver-plated copper contacts provide low resistance connections for DC solar circuits.

Build Integration 4.0 mm Pin

Mated connectors achieve IP67 protection against dust and water ingress, while unmated halves meet IP2X finger-safe rating. The PPO and ABS housing with PC/PA insulation operates from -40 °C to +90 °C and meets UL94-V0 or UL94-5VA flame classification. Each pair requires standard crimping tools and compatible cable; no additional sealing parts are included.

Installer Fit and Limits

Suits installers assembling or repairing string-level DC wiring on residential or commercial arrays who need bulk quantities of 4 mm format connectors. Not for buyers requiring 3 mm or 5 mm pin formats, AC-rated plugs, or pre-assembled cable leads. The 30 A rating at 4 mm² and 6 mm² covers typical module strings; higher current trunk runs need larger contacts.

Kohokohdat

  • 100 pairs in one pack cover large installations
  • Silver-plated copper contacts keep resistance low at 0.2 mΩ
  • IP67 rating when mated seals out dust and water
  • Operates from -40 °C to +90 °C in harsh outdoor climates
  • UL94-V0 or UL94-5VA flame class limits fire risk

Tekniset tiedot

TypeDC Power Supplies
Engine BrandThe Perfect Part
Starter TypeRecoil
MaterialPPO + ABS
Temperature Range-40 C ~ +90 C
Primary Openings1
Secondary Openings1
Wire TypeAI
Features100-pack; Color: Black; Material: PPO + ABS; Insulation Material: PC/PA, black

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the maximum continuous current the 4.0 mm contacts can carry before they overheat?

The 4.0 mm contacts are rated for 30 A continuous current at the specified temperature range.

Do these connectors run hot or make noise when left in full sun all day?

They are passive components with no moving parts, so they generate no noise and only warm slightly within the -40 °C to +90 °C operating range.

What cable sizes and tools must I already have to crimp these 100 pairs properly?

You need 2.5 mm², 4 mm² or 6 mm² (AWG 14/12/10) solar cable and a compatible 4.0 mm crimp tool for the copper silver-plated pins.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.