Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Square pink thermal pad, 30 by 30 by 0.5 mm, soft flexible silicone finish

Thermal Grizzly

Thermal Grizzly Minus Pad 8 30×30×0.5 mm thermal pad

SKU CH-29PK-NF5WA

A 30 × 30 × 0.5 mm silicone thermal pad rated at 8.0 W/mK, electrically insulating to 8 kV/mm and usable from −100 °C to +250 °C

  • Thermal Conductivity8.0 W/mK
  • Long Term Operating Temperature-100 °C to +250 °C
  • FeaturesDescription: Thermal Grizzly Minus Pad is a thermal pad made
  • High thermal conductivity with 8.0 W/mK rating
  • Flexible Shore 00-60 pad conforms to uneven surfaces
  • Electrically insulating up to 8KV/mm for safe use
  • V-0 flammability rating meets strict safety standards
  • Wide -100°C to +250°C operating temperature range

Precision fit for tight gaps

This 30×30×0.5 mm thermal pad targets builders who need a thin, compliant interface for memory modules, VRM heatsinks or console motherboards. The Shore 00-60 material conforms to uneven surfaces with minimal pressure and stays stable from –100 °C to +250 °C.

Not for thick-gap or paste-replacement jobs

Buyers who need to bridge gaps larger than half a millimetre should choose a thicker variant from the same series. The pad is not a substitute for thermal paste on CPU dies or GPU cores where a sub-millimetre bond line is required.

8.0 W/mK conductivity at 0.5 mm thickness

The single figure that decides fit is the 8.0 W/mK rating combined with the 0.5 mm profile; together they set the thermal resistance budget for the specific component you are cooling.

Kohokohdat

  • High thermal conductivity with 8.0 W/mK rating
  • Flexible Shore 00-60 pad conforms to uneven surfaces
  • Electrically insulating up to 8KV/mm for safe use
  • V-0 flammability rating meets strict safety standards
  • Wide -100°C to +250°C operating temperature range

Tekniset tiedot

BrandThermal Grizzly
SeriesMinus Pad 8
ModelTG-MP8-30-30-05 1R
Part NumberTG-MP8-30-30-05-1R
Thermal Conductivity8.0 W/mK
Long Term Operating Temperature-100 °C to +250 °C
FeaturesDescription: Thermal Grizzly Minus Pad is a thermal pad made from modified silicone. The silicone is filled with metal oxides, thus ensuring remarkable thermal conductivity.
Properties: The Thermal Grizzly Minus Pad 8 is a soft gap filler, which is adhesive but easy to remove. The Thermal Grizzly Minus Pad 8 is insulating and sports very high thermal conductivity, even with very little contact pressure.
Standard Colour: The colour is a red-brown.
Shipping: The Thermal Grizzly Minus Pad 8 is currently available for end users in the following sizes: 100mm x 100mm, 120mm x 20mm and 30mm

Kysymyksiä tästä tuotteesta

Will this 30×30 mm pad cover the GPU memory modules on my graphics card?

The pad measures 30×30 mm, so it will cover a square area of that size on any component; measure your module cluster to confirm fit.

Can the 0.5 mm thickness bridge the gap between my original heatsink and the replacement cooler?

At 0.5 mm thick and Shore 00-60 softness, the pad compresses to fill small uneven gaps between a heatsink and a heating element.

How do I verify the pad is transferring heat properly after installation?

Monitor component temperatures under load; a drop toward the expected thermal range for your cooler indicates the 8.0 W/mK pad is working.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.