Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White liquid cooler with 280 mm radiator, two 140 mm fans, copper block, ARGB lighting, white rubber tubes

Thermaltake

Thermaltake CL-W377-PL14SW-A TH280 V2 ARGB Snow liquid cooler

SKU CH-J9D7-BBJM9 MPN CL-W377-PL14SW-A

A 280 mm all-in-one liquid cooler with dual 140 mm hydraulic-bearing fans, ARGB lighting and a copper cold plate for Intel and AMD sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150 AMD A
  • Block MaterialCopper
  • Radiator Size317 x 139 x 27 mm
  • Radiator MaterialAluminum
  • Fan Size2 Fan Slots (140 mm)

Fan Size 2 Fan Slots (140mm)

Color White

  • Broad CPU compatibility with Intel and AMD sockets
  • Copper cold plate transfers heat efficiently from the processor
  • 280 mm aluminium radiator provides large cooling surface
  • Dual 140 mm hydraulic-bearing fans move up to 84.32 CFM at 34.7 dB-A
  • Addressable RGB lighting on pump and fans syncs via 5 V header

TH280 V2 ARGB Snow liquid cooler

This all-in-one liquid cooler uses a copper cold plate and a 317 x 139 x 27 mm aluminium radiator with two 140 mm fans. It fits Intel sockets from LGA 1150 through LGA 1851 and AMD sockets from AM2 through AM5. Builders who need a white-themed loop with addressable RGB will find the colour scheme and 5V ARGB header a direct match.

Sustained-load behaviour

The pump circulates coolant through 460 mm rubber tubes while the hydraulic-bearing fans spin between 500 and 1800 RPM under PWM control. At maximum speed the pair moves 84.32 CFM across the radiator fins, giving steady heat removal during long render or compile sessions. The copper block spreads heat quickly so temperatures rise gradually rather than spiking under continuous load.

Thermals, noise and power

Fan noise reaches 34.7 dB-A at top RPM, dropping lower when the curve reduces speed for lighter workloads. The 4-pin PWM and 3-pin 5V ARGB connectors draw minimal power from the motherboard headers. With the radiator measuring 27 mm thick, case airflow can pass through without excessive restriction, keeping system acoustics balanced in normal use.

Kohokohdat

  • Broad CPU compatibility with Intel and AMD sockets
  • Copper cold plate transfers heat efficiently from the processor
  • 280 mm aluminium radiator provides large cooling surface
  • Dual 140 mm hydraulic-bearing fans move up to 84.32 CFM at 34.7 dB-A
  • Addressable RGB lighting on pump and fans syncs via 5 V header

Tekniset tiedot

BrandThermaltake
SeriesTH280 V2 ARGB Snow
ModelCL-W377-PL14SW-A
TypeLiquid Cooling System
Block CompatibilityIntel LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150
AMD AM5/AM4/AM3+/AM3/AM2+/AM2
Block MaterialCopper
Radiator Size317 x 139 x 27 mm
Radiator MaterialAluminum
Fan Size2 Fan Slots (140 mm)
Fan Dim.140 x 140 x 25 mm
Bearing TypeHydraulic Bearing
Fan RPMPWM 500~1800 R.P.M
Fan Air Flow84.32 CFM Max.
Fan Noise34.7 dB-A
Fan Connector2510 - 4 Pin PWM , 5V ARGB header - 3 Pin
ColorWhite
LED ColorARGB
Tube Dim.Length: 460 mm
Tube MaterialRubber
Lähetyspaino2.27 kg
Pakkauksen mitat376 × 191 × 178 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How loud is the 140 mm hydraulic-bearing fan at its maximum 1800 RPM?

The fan produces 34.7 dB-A at full speed, which is typical for a 140 mm PWM cooler running at 1800 RPM.

Does my motherboard need both a 4-pin PWM header and a 5V 3-pin ARGB header to run this cooler?

Yes, the pump and fans use a 4-pin PWM connector (2510 type) while the addressable RGB lighting requires a standard 5 V 3-pin ARGB header.

Will the 317 mm radiator and 460 mm tubes fit alongside an older ATX board with tall VRM heatsinks?

The 317 x 139 x 27 mm radiator needs a 280 mm mounting area, and the 460 mm tubes give enough reach for most top or front positions even with tall heatsinks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.