Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White 240 mm radiator with two 120 mm ARGB fans and rubber tubes

Thermaltake

Thermaltake TH240 V2 ARGB Snow CL-W364-PL12SW-A liquid cooler

SKU CH-D8FT-TAWPF MPN CL-W364-PL12SW-A

A 240 mm all-in-one liquid cooler with two 120 mm ARGB fans, copper cold plate and aluminium radiator, compatible with current Intel and AMD sockets

  • TypeLiquid Cooling System
  • Block CompatibilityIntel LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150 AMD A
  • Block MaterialCopper
  • Radiator Size276 x 120 x 27 mm
  • Radiator MaterialAluminum
  • Fan Size2 Fan Slots (120 mm)

Fan Size 2 Fan Slots (120mm)

Color White

  • Broad socket support covers Intel and AMD platforms
  • Copper cold plate transfers heat efficiently from the CPU
  • 276 mm radiator provides ample surface area for cooling
  • Dual 120 mm fans deliver 57.05 CFM airflow at 25.8 dB-A
  • Addressable RGB lighting adds customisable white aesthetics

240 mm ARGB liquid cooler

The Thermaltake TH240 V2 ARGB Snow is an all-in-one liquid cooler built around a 276 mm radiator with two 120 mm fans. It fits Intel sockets from LGA 1150 through LGA 1851 and AMD sockets from AM2 through AM5. The white finish and addressable RGB lighting suit builders who want a clean, illuminated loop without custom plumbing.

5 V ARGB header and PWM control

The fans connect through a standard 4-pin PWM header and a 3-pin 5 V ARGB header on the motherboard. Speed ranges from 500 to 2000 RPM, delivering up to 57.05 CFM at a maximum of 25.8 dB-A. If a board lacks a 5 V ARGB header the lighting cannot be synchronised, and the 460 mm tubes limit placement in very large cases.

Copper block and aluminium radiator

The copper cold plate transfers heat from mainstream desktop CPUs into the aluminium radiator. The 240 mm surface area handles typical gaming and productivity loads on mid-range processors. Heavy overclocks on high-core-count chips will push the loop beyond its comfort zone, and the fixed tube length may not reach distant mounting points in extended-ATX layouts.

Kohokohdat

  • Broad socket support covers Intel and AMD platforms
  • Copper cold plate transfers heat efficiently from the CPU
  • 276 mm radiator provides ample surface area for cooling
  • Dual 120 mm fans deliver 57.05 CFM airflow at 25.8 dB-A
  • Addressable RGB lighting adds customisable white aesthetics

Tekniset tiedot

BrandThermaltake
SeriesTH240 V2 ARGB Snow
ModelCL-W364-PL12SW-A
TypeLiquid Cooling System
Block CompatibilityIntel LGA 2066/2011/1851/1700/1200/1156/1155/1151/1150
AMD AM5/AM4/AM3+/AM3/AM2+/AM2
Block MaterialCopper
Radiator Size276 x 120 x 27 mm
Radiator MaterialAluminum
Fan Size2 Fan Slots (120 mm)
Fan Dim.120 x 120 x 25 mm
Bearing TypeHydraulic Bearing
Fan RPMPWM 500~2000 R.P.M
Fan Air Flow57.05 CFM Max.
Fan Noise25.8 dB-A
Fan Connector2510 - 4 Pin PWM , 5V ARGB header - 3 Pin
ColorWhite
LED ColorARGB
Tube Dim.Length: 460 mm
Tube MaterialRubber
Lähetyspaino1.95 kg
Pakkauksen mitat330 × 216 × 140 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Which CPU sockets does the TH240 V2 ARGB Snow support out of the box?

The cooler mounts on Intel LGA 2066, 2011, 1851, 1700, 1200, 1156, 1155, 1151 and 1150, plus AMD AM5, AM4, AM3+, AM3, AM2+ and AM2.

What does the 57.05 CFM maximum airflow mean for everyday cooling?

At full PWM speed the two 120 mm fans push up to 57.05 CFM through the 276 mm radiator, giving strong heat dissipation for mid-range CPUs under load.

What connectors does the pump and fan assembly need on the motherboard?

It requires a 4-pin PWM fan header (2510 type) for speed control and a 5 V 3-pin ARGB header for lighting synchronisation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.