Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 92mm square case fan with transparent blades and 4-pin connector

Thermaltake

Thermaltake DuraMax 9 AF0059 92mm case fan 2850 RPM 48.7 CFM 2 Ball 37.6 dBA 4 Pin

SKU CH-F5SR-VGY7H MPN AF0059

A 92 mm case fan with dual ball bearings delivering 48.7 CFM at 2850 RPM and 37.6 dBA via PWM control

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • Fan Size92mm
  • Fan Thickness25mm
  • Bearing Type2 Ball
  • 92 mm footprint fits tight chassis layouts
  • 2850 RPM delivers 48.7 CFM airflow
  • Dual ball bearing extends operating life
  • 6 dBA maximum keeps noise controlled
  • 4-pin PWM connector enables precise speed control

92mm case fan with 2850 RPM

The Thermaltake DuraMax 9 AF0059 is a single 92mm case fan designed to move air through compact chassis. It spins at 2850 RPM with a tolerance of ±10% and delivers 48.7 CFM of airflow. A 4-pin PWM connector allows motherboard speed control. The black frame measures 92 x 92 x 25 mm.

Suits builds needing a 92mm replacement or upgrade

This unit fits systems that accept a 92mm mounting pattern and a 4-pin header. The dual-ball bearing supports continuous operation at the rated speed. Buyers who require a larger frame size, higher static pressure, or a bundled controller should look at other options. No fan controller is included in the package.

Verify 92mm mounting holes and a 4-pin header

Confirm your case has 92mm screw holes and enough clearance for the 25mm thickness. Check that the motherboard or fan hub provides a 4-pin PWM header for speed regulation. The maximum noise level is 37.6 dBA at full speed. The model was first listed by the manufacturer in February 2019.

Kohokohdat

  • 92 mm footprint fits tight chassis layouts
  • 2850 RPM delivers 48.7 CFM airflow
  • Dual ball bearing extends operating life
  • 6 dBA maximum keeps noise controlled
  • 4-pin PWM connector enables precise speed control

Tekniset tiedot

BrandThermaltake
SeriesDuraMax 9
ModelAF0059
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
Fan Size92mm
Fan Thickness25mm
Bearing Type2 Ball
RPM2850 ± 10% RPM
Air Flow48.7 CFM
Noise Level37.6 dBA (Max)
Power Connector4 Pin
ColorBlack
Dimensions92 x 92 x 25 mm
Lähetyspaino0.14 kg
Pakkauksen mitat152 × 91 × 32 mm

Kysymyksiä tästä tuotteesta

Does my motherboard need a 4-pin PWM header to run the Thermaltake DuraMax 9 AF0059?

Yes, the fan uses a 4-pin connector so the motherboard must provide a matching PWM header for speed control and monitoring.

Will the 92mm by 25mm frame fit the same mounting holes as my older 92mm case fans?

The fan measures 92 x 92 x 25 mm, matching the standard 92mm screw spacing used on older chassis and radiators.

How can I confirm the fan is spinning at the rated 2850 RPM after installation?

Check the fan speed in BIOS or monitoring software; it should read around 2850 RPM with a tolerance of ±10% under full PWM duty.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.