NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Thermaltake
ATX mid-tower case with curved and flat tempered glass panels, two pre-installed 120mm rear fans, support for 360mm radiators, 460mm GPUs, 260mm PSUs.
This ATX mid-tower chassis features a curved 4mm tempered glass side panel and a full glass front panel for wide component visibility. It supports Mini-ITX, Micro-ATX and ATX motherboards, including hidden-connector designs from ASUS, MSI and Gigabyte. Two pre-installed 120mm CT PWM fans provide rear exhaust airflow out of the box.
The case arrives with the two rear fans already mounted, reducing initial build time. Builders must supply their own 90-degree riser cable if they plan to use the rotatable PCIe tray for vertical GPU mounting. Hidden-connector motherboards require careful cable routing through the dedicated cutouts to avoid blocking the glass panels.
Verify that your graphics card length does not exceed 460mm and that your CPU cooler height stays within 160mm. Confirm the power supply length is no longer than 260mm to fit the allocated bay. Ensure the chosen motherboard form factor matches the supported Mini-ITX, Micro-ATX or ATX dimensions.
| Motherboard Compatibility | 6.7 x 6.7 (Mini ITX), 9.6 x 9.6 (Micro ATX), 12 x 9.6 (ATX) |
|---|---|
| Brand | Thermaltake |
| Series | Thermaltake View 390 TG |
| Color | Black |
| Case Material | SPCC |
| Type | ATX Mid Tower |
| Side Panel | 4mm Tempered Glass x 2 |
| Internal 3.5" Drive Bays | 2 |
| Lähetyspaino | 13.25 kg |
| Pakkauksen mitat | 591 × 559 × 381 mm |
Connect the fans to a PWM header, power on the system and verify both rear 120mm fans spin; adjust speed in BIOS or fan software to confirm control response.
The case includes two preinstalled 120mm CT PWM fans, two 4mm tempered glass panels, and mounting hardware; a 90-degree PCIe riser cable for vertical GPU mounting and the optional 3.9-inch LCD screen kit are sold separately.
The single CA-11F-00M1WN-01 model supports GPUs up to 460mm and radiators up to 360mm, so this version covers both requirements without needing a different SKU.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?