NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Thermaltake
ATX mid-tower case with curved and flat tempered glass panels, two pre-installed 120mm rear fans, support for 360mm radiators, 460mm GPUs, 260mm PSUs.
This ATX mid-tower chassis features a curved 4mm tempered glass side panel and a full glass front panel for wide component visibility. It supports Mini-ITX, Micro-ATX and ATX motherboards, including hidden-connector designs from ASUS, MSI and Gigabyte. Two pre-installed 120mm CT PWM fans provide rear exhaust airflow out of the box.
The case arrives with the two rear fans already mounted, reducing initial build time. Builders must supply their own 90-degree riser cable if they plan to use the rotatable PCIe tray for vertical GPU mounting. Hidden-connector motherboards require careful cable routing through the dedicated cutouts to avoid blocking the glass panels.
Verify that your graphics card length does not exceed 460mm and that your CPU cooler height stays within 160mm. Confirm the power supply length is no longer than 260mm to fit the allocated bay. Ensure the chosen motherboard form factor matches the supported Mini-ITX, Micro-ATX or ATX dimensions.
| Motherboard Compatibility | 6.7 x 6.7 (Mini ITX), 9.6 x 9.6 (Micro ATX), 12 x 9.6 (ATX) |
|---|---|
| Brand | Thermaltake |
| Series | Thermaltake View 390 TG |
| Color | Black |
| Case Material | SPCC |
| Type | ATX Mid Tower |
| Side Panel | 4mm Tempered Glass x 2 |
| Internal 3.5" Drive Bays | 2 |
| Prepravná hmotnosť | 13.25 kg |
| Rozmery balenia | 591 × 559 × 381 mm |
Connect the fans to a PWM header, power on the system and verify both rear 120mm fans spin; adjust speed in BIOS or fan software to confirm control response.
The case includes two preinstalled 120mm CT PWM fans, two 4mm tempered glass panels, and mounting hardware; a 90-degree PCIe riser cable for vertical GPU mounting and the optional 3.9-inch LCD screen kit are sold separately.
The single CA-11F-00M1WN-01 model supports GPUs up to 460mm and radiators up to 360mm, so this version covers both requirements without needing a different SKU.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?