Timetec 128GB M.2 2280 SATA internal SSD
- Internal Solid Stat…
- M.2 2280
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Timetec
A 128GB 2.5-inch SATA SSD with 3D NAND and SLC cache delivering up to 520MB/s read and 490MB/s write speeds
Style 2.5" SSD
Options 128GB (1 Pack)
The Timetec 128GB internal SSD uses a 2.5-inch, 7mm form factor and a SATA III 6Gb/s interface. It suits desktops and laptops that accept a standard 2.5-inch SATA drive. The drive is backward compatible with SATA II and SATA I ports. Supported operating systems include Windows 7 through Windows 11, macOS 10.4 or later and Linux kernel 2.6.33 or later.
Sequential read reaches up to 520 MB/s and sequential write up to 490 MB/s according to the specification table. The manufacturer highlights quote slightly higher peaks of 550 MB/s read and 500 MB/s write with SLC cache assistance. SLC caching and 3D NAND flash help maintain throughput during longer workloads. TRIM, garbage collection and wear-leveling work together to preserve consistent speed over time.
Low power consumption is cited as a design goal for longer battery life in notebooks. No active cooling is required because the drive has no moving parts. S.M.A.R.T. monitoring and ECC error correction support data integrity without adding thermal load. The 1,000,000-hour MTBF and 1,500,000-hour MTTF ratings reflect the expected reliability under normal operating conditions.
| Brand | Timetec |
|---|---|
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Capacity | 128GB |
| Memory Components | NAND FLASH |
| Interface | SATA III |
| Max Sequential Read | Up to 520 MBps |
| Max Sequential Write | Up to 490 MBps |
| Package Content | 1 Pack |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The drive uses low-power 3D NAND and SATA III, so it stays cool and draws minimal power even under continuous workloads.
A free 2.5-inch drive bay or caddy that accepts a 7 mm SATA III drive and a spare SATA data plus power cable.
Yes, the drive is backward compatible with SATA II 3 Gb/s and SATA I 1.5 Gb/s, though speeds will be limited by the older interface.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?