Timetec 16GB Kit (2x8GB) DDR3L 1866MHz CL13 1.35V 204-Pin SODIMM laptop RAM
- 16GB (2 x 8GB)
- 204-Pin DDR3 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Timetec
8GB DDR3L SODIMM running at 1866MHz CL13 and 1.35V, built for compatible Apple iMac and MacBook Pro models
Capacity 8GB
This 8GB DDR3L 1866MHz SODIMM module uses a 204-pin layout and runs at 1.35V with CL13 latency. It is built as an unbuffered, non-ECC dual-rank stick using selected ICs. The memory is intended for upgrading supported Apple iMac systems where extra capacity improves multitasking headroom.
Verify the machine identifier matches the listed compatible models such as iMac 17,1 or A1419 before ordering. Confirm the system accepts DDR3L SODIMM modules at 1866MHz and that a free slot exists for the 204-pin form factor. The module also tolerates 1.5V operation if the platform requires it.
At 1.35V the stick draws less power than standard DDR3, helping to limit heat output inside the compact iMac chassis. No active cooling is present on the module itself, so it relies on the system's internal airflow. Typical operation remains quiet with no audible noise from the memory.
| Brand | Timetec |
|---|---|
| Model | MM-H8GD318J7D |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | For Apple System |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The box contains the single 8GB 204-pin SODIMM module. No extra cables or brackets are required; a small Phillips screwdriver and the computer's service manual are the only tools needed for installation.
The module is rated for both 1.35V and 1.5V operation. Your iMac (model identifiers MK462LL/A, MK472LL/A, MK482LL/A or the BTO Core i7 4.0 GHz version) will automatically select the correct voltage, so no manual choice is necessary.
It indicates a DDR3L data rate of 1866MT/s with a CAS latency of 13 cycles at 1.35V. The iMac's memory controller will configure these timings automatically, delivering the rated bandwidth and latency for multitasking workloads.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?