Timetec 16GB Kit (2x8GB) DDR3L 1866MHz CL13 1.35V 204-Pin SODIMM laptop RAM
- 16GB (2 x 8GB)
- 204-Pin DDR3 SO-DIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Timetec
8GB DDR3L SODIMM running at 1866MHz CL13 and 1.35V, built for compatible Apple iMac and MacBook Pro models
Capacity 8GB
This 8GB DDR3L 1866MHz SODIMM module uses a 204-pin layout and runs at 1.35V with CL13 latency. It is built as an unbuffered, non-ECC dual-rank stick using selected ICs. The memory is intended for upgrading supported Apple iMac systems where extra capacity improves multitasking headroom.
Verify the machine identifier matches the listed compatible models such as iMac 17,1 or A1419 before ordering. Confirm the system accepts DDR3L SODIMM modules at 1866MHz and that a free slot exists for the 204-pin form factor. The module also tolerates 1.5V operation if the platform requires it.
At 1.35V the stick draws less power than standard DDR3, helping to limit heat output inside the compact iMac chassis. No active cooling is present on the module itself, so it relies on the system's internal airflow. Typical operation remains quiet with no audible noise from the memory.
| Brand | Timetec |
|---|---|
| Model | MM-H8GD318J7D |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | For Apple System |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The box contains the single 8GB 204-pin SODIMM module. No extra cables or brackets are required; a small Phillips screwdriver and the computer's service manual are the only tools needed for installation.
The module is rated for both 1.35V and 1.5V operation. Your iMac (model identifiers MK462LL/A, MK472LL/A, MK482LL/A or the BTO Core i7 4.0 GHz version) will automatically select the correct voltage, so no manual choice is necessary.
It indicates a DDR3L data rate of 1866MT/s with a CAS latency of 13 cycles at 1.35V. The iMac's memory controller will configure these timings automatically, delivering the rated bandwidth and latency for multitasking workloads.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม