Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four white aluminium heat-spreader DDR4 modules in a 64 GB kit

Timetec

Timetec Pinnacle Konduit 64GB (4x16GB) DDR4 3200MHz White

SKU CH-73HC-Q6A1B

Four 16 GB DDR4 modules run at 3200 MHz with CL16 latency and a white aluminium heat spreader

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ColorWhite

Capacity 64GB (4 x 16GB)

  • 64GB total capacity across four 16GB modules
  • White aluminium heat spreader for improved thermal performance
  • DDR4 3200MHz speed with CL16 tested latency
  • XMP 2.0 support enables one-click overclocking in BIOS
  • Compatible with AMD and Intel DDR4 desktop platforms

64 GB DDR4 Kit for AMD and Intel Systems

This kit provides 64 GB of DDR4 memory across four 16 GB modules rated for 3200 MHz operation. White aluminum heat spreaders cover each stick for a consistent look inside a gaming or enthusiast build. XMP 2.0 support allows the rated speed and timings to be applied with a single BIOS setting on compatible AMD and Intel DDR4 motherboards. Without XMP enabled the modules will run at the standard 2400 MHz base frequency.

Thermals Noise and Power at 1.35 Volts

The modules operate at 1.35 V using a high-conductivity thermal pad and reinforced heatsink to move heat away from the memory ICs. Lower voltage reduces power draw compared to higher-voltage DDR4 kits while still delivering the rated 3200 MHz data rate. Passive cooling means no fan noise is added to the system. The aluminum spreader design keeps temperatures in check during typical gaming and multitasking workloads.

Sustained Load Behaviour with CL16 Timings

Tested latencies of 16-18-18-38 and 16-20-20-40 are maintained once XMP 2.0 is active in the BIOS. Each IC is individually screened to support stable operation at the advertised frequency during extended sessions. Dual-rank 1Rx8 organisation on the 16 GB modules helps sustain bandwidth under continuous memory-intensive tasks. The kit delivers 25 600 MB/s peak bandwidth without requiring active airflow directed at the memory slots.

Kohokohdat

  • 64GB total capacity across four 16GB modules
  • White aluminium heat spreader for improved thermal performance
  • DDR4 3200MHz speed with CL16 tested latency
  • XMP 2.0 support enables one-click overclocking in BIOS
  • Compatible with AMD and Intel DDR4 desktop platforms

Tekniset tiedot

Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ColorWhite

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the four 16GB DDR4 modules and what step is often missed?

Insert each 288-pin module into the motherboard slots until the latches click, then enable the XMP 2.0 profile in BIOS so the kit runs at 3200 MHz instead of the 2400 MHz default.

What maintenance or replacement will the white aluminum heat spreader and thermal pad need over time?

The heat spreader and thermal pad are passive; no scheduled replacement is required. Clean dust from the fins with compressed air if temperatures rise.

What limit appears first during sustained heavy workloads on this 1.35V DDR4 kit?

The CAS latency of CL16-18-18-38 (or CL16-20-20-40) sets the timing floor; thermal throttling may occur if case airflow cannot dissipate heat from the four modules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.