Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch bare hard drive with exposed circuit board and SAS connector

Toshiba

Toshiba MG03SCA100 1TB 7200 RPM 64MB SAS 3.5" internal hard drive

SKU CH-S2CZ-1A9S3 MPN MG03SCA100

1 TB enterprise hard drive with 7200 RPM, 64 MB cache and SAS interface for 24/7 server operation

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Cache64MB
  • Average Latency6Gb/s

Options 1TB

  • Designed for 24x7 operation in server environments
  • SAS 6Gb/s interface delivers reliable data transfer
  • 7200 RPM spindle speed enables responsive performance
  • 64 MB cache buffers bursts for smoother throughput
  • 5-inch form factor fits standard drive bays

Toshiba 1 TB SAS enterprise drive

This 3.5-inch nearline hard drive delivers 1 TB of storage on a 6 Gb/s SAS interface, spinning at 7200 RPM with 64 MB cache. It is built for continuous 24 x 7 operation in server and storage-array environments.

Suits always-on server arrays.

The drive targets servers and storage arrays that run continuously and benefit from rotational-vibration safeguards and enhanced power-condition states. Systems requiring a different physical interface or a smaller form factor cannot use this unit.

6 Gb/s SAS interface decides compatibility

A SAS host bus adapter or controller with 6 Gb/s support is mandatory; the drive will not function on ports that only provide other signalling types. The 26.1 mm height fits standard 3.5-inch drive bays in rack and tower chassis.

Kohokohdat

  • Designed for 24x7 operation in server environments
  • SAS 6Gb/s interface delivers reliable data transfer
  • 7200 RPM spindle speed enables responsive performance
  • 64 MB cache buffers bursts for smoother throughput
  • 5-inch form factor fits standard drive bays

Tekniset tiedot

BrandTOSHIBA
ModelMG03SCA100
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1TB
RPM7200 RPM
Cache64MB
Average Latency6Gb/s
FeaturesThe new reliable nearline model features a top storage capacity of up to 4 TB in a 3.5-inch form factor and leading-edge 6Gb/sec SAS interface. Intended for 24 x 7 operation, the MG03SCAxxx also includes features that are critical to business operations such as enhanced Error Correction Code (ECC), Anti Rotational Vibration (RV) technology for multi-drive systems, and enhanced power condition state technology.
The MG03SCAxxx provides a flexible and cost effective storage solution for enterprise applications including entry-level servers, storage arrays, RAID systems as well as privat
UsageIdeal for Servers
Form Factor3.5"
Height (maximum)26.1 mm
Width (maximum)101.6 mm
Length (maximum)147 mm
Lähetyspaino1.36 kg
Pakkauksen mitat174 × 132 × 36 mm

Tämän mallin muut versiot

3 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How does the 7200 RPM speed affect performance in a server?

The 7200 RPM spindle delivers consistent throughput for mixed read and write workloads typical of 24x7 nearline storage.

What does the SAS 6Gb/s interface limit in practice?

The SAS 6Gb/s link caps the maximum burst transfer rate at 6Gb/s, while sustained rates depend on the 64MB cache and platter density.

Will the 26.1 mm height fit a standard 3.5-inch drive bay?

Yes, the 26.1 mm height matches the standard 3.5-inch form factor used in most server and workstation bays.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.