Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch internal hard drive with exposed circuit board underside and SATA connectors

Toshiba

Toshiba N300 HDWG480XZSTA 8TB 7200 RPM 256MB Cache 3.5" SATA Internal Hard Drive

SKU CH-A1MJ-XPB3D MPN HDWG480XZSTA

8 TB 3.5" SATA internal hard drive running at 7200 RPM with 256 MB cache, built for 24/7 NAS operation

  • PackagingRetail
  • InterfaceSATA 6.0Gb/s
  • Capacity8TB
  • NAND Flash Memory TypeHard Drives
  • RPM7200 RPM
  • Cache256MB

Options 8TB

  • 8TB capacity stores large media libraries and backups
  • 7200 RPM with 256MB cache delivers responsive file access
  • Designed for 24/7 NAS operation with up to 180TB yearly workload
  • RV sensors compensate vibration for consistent performance in multi-bay enclosures
  • SATA 6.0Gb/s interface fits standard 3.5-inch drive bays

NAS-ready 8 TB storage

The Toshiba N300 HDWG480XZSTA is an 8 TB, 7200 RPM desktop drive built for network attached storage. It targets personal, home-office and small-business NAS deployments that run continuously.

RV sensors and 8-bay scaling

Rotational vibration sensors compensate for transient vibration in multi-bay enclosures. The 3.5-inch form factor fits standard drive trays and the SATA 6.0 Gb/s interface connects to common NAS backplanes. Retail packaging is supplied.

180 TB per year workload limit

The drive is rated for up to 180 TB of data written or read each year. Sustained workloads beyond that level may reduce reliability. The SATA interface caps peak throughput at the bus maximum, so sequential speeds cannot exceed that ceiling.

Kohokohdat

  • 8TB capacity stores large media libraries and backups
  • 7200 RPM with 256MB cache delivers responsive file access
  • Designed for 24/7 NAS operation with up to 180TB yearly workload
  • RV sensors compensate vibration for consistent performance in multi-bay enclosures
  • SATA 6.0Gb/s interface fits standard 3.5-inch drive bays

Tekniset tiedot

BrandTOSHIBA
SeriesN300
ModelHDWG480XZSTA
PackagingRetail
InterfaceSATA 6.0Gb/s
Capacity8TB
NAND Flash Memory TypeHard Drives
RPM7200 RPM
Cache256MB
FeaturesToshiba's N300 3.5-inch NAS internal hard drive is designed to meet the reliability, performance, endurance, and scalability requirements of 24/7 network attached storage application for personal, home office and small business use.
The N300 delivers up to 16TB of storage capacity and provides up to 1,200,000 hour MTTF and designed for 24/7 power-on operation. This drive features rotational vibration (RV) sensors which automatically detect and compensate for transient vibrations to deliver consistent performance in multi-bay storage enclosures.
With support for up to 8 drive bays6 in
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.85mm
Length (maximum)147.00mm
Lähetyspaino0.82 kg
Pakkauksen mitat192 × 140 × 62 mm

Tämän mallin muut versiot

1 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the SATA 6.0Gb/s interface cap in practice?

The SATA 6.0Gb/s interface caps the theoretical maximum throughput at 6.0Gb/s, while the 7200 RPM platters and 256MB cache deliver sustained transfer rates within that limit for NAS workloads.

What physical clearance does the 3.5-inch drive need to fit in a NAS bay?

The drive measures 147.00mm long, 101.85mm wide and 26.10mm high, so the bay must accommodate those maximum dimensions for a secure fit.

How is the drive installed in a multi-bay NAS and what step is often missed?

Mount the drive using the standard 3.5-inch screw holes, connect SATA data and power cables, then enable rotational vibration sensor calibration in the NAS firmware — a step many users skip.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.