Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Yellow duplex singlemode fibre patch cable with LC push-pull connectors, 2 metre length

Tripp Lite

Tripp Lite N370-02M-T Duplex Singlemode 8.3/125 Fibre Optic Cable LC/LC 2m

SKU CH-K5XK-DG0AS MPN N370-02M-T

A duplex singlemode 8.3/125 fibre patch cable with LC push-pull connectors, two metres long, rated for 10 Gbps LAN links

  • TypeOthers
  • ColorN/A
  • Connector Number1
  • Singlemode 8.3/125 µm fibre for long-distance 10 Gbps links
  • Duplex LC connectors with push/pull tabs for one-hand high-density installs
  • 2 m yellow OFNR jacket identifies singlemode cable at a glance
  • Glass-core 9/125 zipcord keeps attenuation within current industry limits
  • Bevelled LC ferrule ends ensure low insertion loss on every connection

Duplex Singlemode Fiber Patch Cable

The Tripp Lite N370-02M-T is a duplex singlemode fiber optic patch cable designed for LAN installations requiring high-speed data links. It connects network equipment such as switches and patch panels using standard LC interfaces. The two-metre length suits rack-to-rack or panel-to-device runs in enterprise environments.

10 Gbps Data Transfer Speed

This cable supports data transfer speeds up to 10 Gbps over its 9/125 micron glass core. Attenuation loss meets or exceeds current industry standards for singlemode transmission. The LC male connectors are tested for low insertion loss and feature beveled glass ends for reliable mating. Yellow OFNR-rated PVC jacket identifies the singlemode rating at a glance.

Push/Pull Tabs for Dense Installations

Push/pull tab connectors allow one-handed insertion and removal in high-density data centre racks. The sturdy LC duplex zipcord construction resists damage during routine maintenance. OFNR-rated jacket material complies with riser fire-safety requirements for indoor vertical runs. Glass fibre core ensures consistent performance without polymer-related signal degradation.

Kohokohdat

  • Singlemode 8.3/125 µm fibre for long-distance 10 Gbps links
  • Duplex LC connectors with push/pull tabs for one-hand high-density installs
  • 2 m yellow OFNR jacket identifies singlemode cable at a glance
  • Glass-core 9/125 zipcord keeps attenuation within current industry limits
  • Bevelled LC ferrule ends ensure low insertion loss on every connection

Tekniset tiedot

BrandTripp Lite
TypeOthers
ColorN/A
Connector Number1
Lähetyspaino0.02 kg
Pakkauksen mitat229 × 165 × 6 mm

Kysymyksiä tästä tuotteesta

What does the 10 Gbps speed mean when this cable is connected in my network?

The cable supports data rates up to 10 Gbps over singlemode fibre, so switches and transceivers rated for 10 Gigabit Ethernet can run at line speed across the two-metre link.

How does the LC duplex interface limit what I can plug this into?

Dual LC connectors with push-pull tabs mate only with LC ports on patch panels or switches; the zipcord layout carries one transmit and one receive fibre in a single jacket.

What physical space and mounting does the 2 m yellow OFNR jacket need?

The two-metre yellow PVC jacket is OFNR rated for riser runs and fits standard LC patch-panel density; push-pull tabs allow one-hand insertion in tight racks.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.