Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Yellow duplex singlemode fibre patch cable with LC push-pull connectors, 2 metre length

Tripp Lite

Tripp Lite N370-02M-T Duplex Singlemode 8.3/125 Fibre Optic Cable LC/LC 2m

SKU CH-K5XK-DG0AS MPN N370-02M-T

A duplex singlemode 8.3/125 fibre patch cable with LC push-pull connectors, two metres long, rated for 10 Gbps LAN links

  • TypeOthers
  • ColorN/A
  • Connector Number1
  • Singlemode 8.3/125 µm fibre for long-distance 10 Gbps links
  • Duplex LC connectors with push/pull tabs for one-hand high-density installs
  • 2 m yellow OFNR jacket identifies singlemode cable at a glance
  • Glass-core 9/125 zipcord keeps attenuation within current industry limits
  • Bevelled LC ferrule ends ensure low insertion loss on every connection

Duplex Singlemode Fiber Patch Cable

The Tripp Lite N370-02M-T is a duplex singlemode fiber optic patch cable designed for LAN installations requiring high-speed data links. It connects network equipment such as switches and patch panels using standard LC interfaces. The two-metre length suits rack-to-rack or panel-to-device runs in enterprise environments.

10 Gbps Data Transfer Speed

This cable supports data transfer speeds up to 10 Gbps over its 9/125 micron glass core. Attenuation loss meets or exceeds current industry standards for singlemode transmission. The LC male connectors are tested for low insertion loss and feature beveled glass ends for reliable mating. Yellow OFNR-rated PVC jacket identifies the singlemode rating at a glance.

Push/Pull Tabs for Dense Installations

Push/pull tab connectors allow one-handed insertion and removal in high-density data centre racks. The sturdy LC duplex zipcord construction resists damage during routine maintenance. OFNR-rated jacket material complies with riser fire-safety requirements for indoor vertical runs. Glass fibre core ensures consistent performance without polymer-related signal degradation.

Prednosti

  • Singlemode 8.3/125 µm fibre for long-distance 10 Gbps links
  • Duplex LC connectors with push/pull tabs for one-hand high-density installs
  • 2 m yellow OFNR jacket identifies singlemode cable at a glance
  • Glass-core 9/125 zipcord keeps attenuation within current industry limits
  • Bevelled LC ferrule ends ensure low insertion loss on every connection

Špecifikácie

BrandTripp Lite
TypeOthers
ColorN/A
Connector Number1
Prepravná hmotnosť0.02 kg
Rozmery balenia229 × 165 × 6 mm

Otázky k tomuto produktu

What does the 10 Gbps speed mean when this cable is connected in my network?

The cable supports data rates up to 10 Gbps over singlemode fibre, so switches and transceivers rated for 10 Gigabit Ethernet can run at line speed across the two-metre link.

How does the LC duplex interface limit what I can plug this into?

Dual LC connectors with push-pull tabs mate only with LC ports on patch panels or switches; the zipcord layout carries one transmit and one receive fibre in a single jacket.

What physical space and mounting does the 2 m yellow OFNR jacket need?

The two-metre yellow PVC jacket is OFNR rated for riser runs and fits standard LC patch-panel density; push-pull tabs allow one-hand insertion in tight racks.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.