NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Tripp Lite
Wall-mount 19 in. rack cabinet holds 18U of server-depth gear up to 32.5 in. deep while extending only 24 in. from the wall
The Tripp Lite SRW18UHD is an 18U side-mount wall cabinet that holds 19-inch rack equipment up to 32.5 inches deep while extending less than 25 inches from the wall. It supports a maximum load of 500 lbs and meets EIA-310-E standards for server and network installations.
The package provides 42 M6 cage nuts, 42 M6 screws, 42 M6 washers, 42 12-24 screws, a key set and an owner's manual so installers can secure gear to square-hole or threaded rails without sourcing extra fasteners.
Equipment depth is capped at 32.5 inches and the cabinet protrudes 24.8 inches from the wall, so deeper servers will not fit; side access is provided by vented doors and a removable panel but front-to-rear airflow paths are constrained by the side-mount orientation.
| Brand | Tripp Lite |
|---|---|
| Model | SRW18UHD |
| Type | Side-Mount Wall-Mount Rack Enclosure Cabinet |
| Rack Units | 18U |
| Color | Black |
| Weight Capacity | 500 lbs. |
| Specification | Installed whole system maximum rack depth: 32.5" Installed whole system minimum rack depth: 3" EIA Mounting Rails: Square holes / 12-24 threaded holes CERTIFICATIONS Certifications: EIA-310-E NOM (Mexico): Tested NOM (Mexico) Approvals: RoHS |
| Features | Heavy-Duty/High Weight Capacity side-mount construction 18U of server depth equipment capacity Fully vented doors and side panel Adjustable front and rear rails Dual-rail mounting designs supports equipment mounting via square holes or threaded holes 500lb weight capacity |
| Included Accessory | SRW18UHD Wall-mount enclosure cabinet (42) M6 cage nuts (42) M6 equipment mounting screws (42) M6 washers (42) 12-24 equipment mounting screws (1) Key set Owner's Manual |
| Unit Dimension | 36.96" x 36.22" x 24.77" |
| Unit Weight | 119.9 lbs. |
| Shipping Dimension | 41.33" x 37.80" x 25.60" |
| Shipping Weight | 137.5 lbs. |
| Lähetyspaino | 68.04 kg |
| Pakkauksen mitat | 1082 × 972 × 668 mm |
The 42 M6 cage nuts and 42 M6 equipment mounting screws are included for initial installation; replacements are only needed if threads strip or hardware is lost during future equipment changes.
The 500 lb maximum load capacity is the structural limit; the side-mount design reduces leverage on the wall, so the cabinet frame reaches its rated capacity before the wall mounting does.
Fully vented doors, top, bottom and removable side panel provide passive airflow; heat dissipation depends on the installed equipment's own cooling and room ambient temperature.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?