Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver standalone SD and microSD duplicator with seven target slots and LCD display

U-Reach, Inc.

U-Reach, Inc. SD908S 1-7 Target SD/mSD Duplicator 256M Buffer

SKU CH-ETS6-2ZW52 MPN SD908S

Duplicates up to seven SD or microSD cards simultaneously at 2 GB per minute with a 256 MB buffer and DoD 5220.22-M compliant erase

  • TypeSD/MicroSD Duplicator
  • Target1 to 7
  • ControllerU-Reach
  • Buffer Memory256M
  • Supported MediaSDXC, SDHC, SD & mSD
  • Data Transfer Rate2 GB/Min
  • Standalone operation with no computer required
  • Copies up to 2 GB per minute per port
  • 256 MB buffer memory for stable transfers
  • DoD 5220.22-M compliant erase for data security
  • A2 Fake Picker detects counterfeit cards in seconds

1-7 Target SD/mSD Duplicator

The U-Reach SD908S is a standalone flash memory duplicator that copies one source card to up to seven targets simultaneously. It operates without a host computer and uses a 256M buffer to sustain a measured 2 GB per minute per port.

For high-volume SD and microSD workflows

This unit suits technicians and integrators who need bit-for-bit duplication, DoD 5220.22-M compliant erasure, and rapid media diagnostics including fake-capacity detection and bad-sector scanning. It is not for buyers who only clone a few cards a month, who need USB interfaces, or who require networked management and logging features.

256M buffer with 2 GB/min per port

The 256M buffer memory feeds each of the seven target slots at a verified 2 GB per minute, determining the maximum sustainable throughput for large-scale SDXC, SDHC, SD and microSD duplication jobs.

Kohokohdat

  • Standalone operation with no computer required
  • Copies up to 2 GB per minute per port
  • 256 MB buffer memory for stable transfers
  • DoD 5220.22-M compliant erase for data security
  • A2 Fake Picker detects counterfeit cards in seconds

Tekniset tiedot

BrandU-Reach
ModelSD908
TypeSD/MicroSD Duplicator
Target1 to 7
ControllerU-Reach
Buffer Memory256M
Supported MediaSDXC, SDHC, SD & mSD
Data Transfer Rate2 GB/Min
Language SupportEnglish / Spanish / French / Japanese
Display20 x 2 LCD
Operating TypeStandalone
Environmental SpecRoSH, REACH
Power SupplyAC: 115-230 V, 50/60 Hz

Kysymyksiä tästä tuotteesta

What power supply does the SD908S duplicator require?

The unit runs on AC 115-230 V at 50/60 Hz, so it plugs into a standard mains outlet without an external adapter.

How are the SD and microSD cards inserted for duplication?

Cards are placed into the front-loading sockets; the quick socket-swap module lets you change media without tools, and the copier operates standalone with no PC connection needed.

Which diagnostic tools help spot worn or counterfeit cards over time?

Built-in utilities include A2 Fake Picker for true capacity, Speed Check for read/write rates in seconds, and H3/H5 Media Check for bad-sector counts via bit-for-bit scan.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.