Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Ubiquiti Networks

Ubiquiti Networks Flex Mini USW-Flex-Mini 5-Port PoE Layer 2 network switch

SKU CH-2AQ4-Z51C9

A compact five-port managed Layer 2 switch with PoE input power option and 10 Gbps switching capacity

  • FormatDesktop
  • Network Management TypeManaged
  • Primary Ports5 x RJ45
  • Primary Port SpeedTotal non-blocking throughput 5 Gbps Switching capacity 10 G
  • PoEYes
  • Layer2

Model Flex Mini

Näytä 1 muuta kokoonpanoa

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Managed Layer 2 switching with port isolation and storm control
  • 5 Gbps non-blocking throughput across five Gigabit RJ45 ports
  • 10 Gbps switching capacity and 7.44 Mpps forwarding rate
  • Powered via 802.3 PoE input or included 5V USB-C adapter
  • Silent fanless desktop design measuring 107 x 70 x 21 mm

Compact five-port managed switch

The Ubiquiti Networks Flex Mini is a desktop Layer 2 switch with five Gigabit RJ45 ports and a total non-blocking throughput of 5 Gbps. It suits small offices, home labs or retail counters that need silent, fanless operation and simple VLAN or port-isolation features. Power comes either from the included 5 V USB-C adapter or through the single PoE input port when an upstream 802.3 af/at source is available. UniFi Network Controller 5.12 or later handles configuration and monitoring.

Sustained load behaviour

Switching capacity reaches 10 Gbps with a forwarding rate of 7.44 Mpps, so the fabric does not saturate when all five ports run at line rate. The fanless chassis operates from -5 to 45 °C (23 to 113 °F) at 10 to 90 % non-condensing humidity, keeping throughput steady without acoustic noise. Storm control, multicast and broadcast rate limiting, and egress rate limits prevent traffic storms from degrading other ports during prolonged bursts. Jumbo-frame support lets large frames pass without fragmentation overhead.

Upgrade context

It replaces an unmanaged desktop switch when you need per-port VLANs, port mirroring for diagnostics, or flow-control tuning for latency-sensitive gear. The jump is worth it if you want centralised UniFi management instead of per-device web interfaces, or if PoE-in powering removes the need for a nearby mains socket. Buyers who need Layer 3 routing, SFP uplinks, or more than five copper ports should look elsewhere.

Kohokohdat

  • Managed Layer 2 switching with port isolation and storm control
  • 5 Gbps non-blocking throughput across five Gigabit RJ45 ports
  • 10 Gbps switching capacity and 7.44 Mpps forwarding rate
  • Powered via 802.3 PoE input or included 5V USB-C adapter
  • Silent fanless desktop design measuring 107 x 70 x 21 mm

Tekniset tiedot

BrandUbiquiti Networks
SeriesNetwork Switch
ModelFlex Mini
Part NumberUSW-Flex-Mini
FormatDesktop
Network Management TypeManaged
Primary Ports5 x RJ45
Primary Port SpeedTotal non-blocking throughput 5 Gbps
Switching capacity 10 Gbps
Forwarding rate 7.44 Mpps
PoEYes
Layer2
Layer 2 FeaturesLayer 2 features Port isolation
Storm control
Port mirroring
Multicast / broadcast rate limiting
Flow control
Jumbo frames
Egress rate limit
LEDsSystem Status
Ethernet Speed/link/activity
Dimensions107 x 70 x 21 mm (4.2 x 2.8 x 0.8")
Weight150 g (5.3 oz)
Temperature-5 to 45° C (23 to 113° F)
Humidity10 to 90% noncondensing
Lähetyspaino0.23 kg
Pakkauksen mitat184 × 114 × 48 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the fanless USW-Flex-Mini stay cool when running continuously at the top of its operating range?

The switch is rated for -5 to 45° C ambient temperature and has no moving parts, so it dissipates heat passively within that envelope.

What must I already own to manage the USW-Flex-Mini out of the box?

You need a device that can run the UniFi Network Controller version 5.12.5 or higher to configure and monitor the switch.

Can I plug the USW-Flex-Mini into an older 802.3af PoE switch for both power and data?

Yes, the single PoE input port accepts 802.3 af/at power, so a legacy PoE switch can supply both electricity and the uplink connection.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.