Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Ubiquiti Networks

Ubiquiti Networks USW-Pro-Max-16-PoE 16-port Layer 3 network switch

SKU CH-TJH2-SJ8WR MPN USW-Pro-Max-16-PoE

A managed 16-port Layer 3 PoE switch with twelve GbE, four 2.5 GbE and two 10G SFP+ ports, 84 Gbps switching capacity and 180 W PoE budget

  • FormatDesktop
  • Network Management TypeManaged
  • Primary Ports16 x RJ45 + 2 x SFP
  • Primary Port SpeedTotal non-blocking throughput 42 Gbps Switching capacity 84
  • Primary Port Type(12) GbE RJ45 ports (4) 1/2.5 GbE RJ45 ports (2) 10G SFP+ po
  • Management InterfaceEthernet In-Band

Model Pro Max 16 PoE

Primary Port 16 Port

  • Layer 3 routing with 84 Gbps switching capacity
  • 16 ports including four 2.5 GbE and two 10G SFP+
  • 180 W total PoE budget across all ports
  • Etherlighting ports show speed, link and native VLAN
  • Silent fanless cooling in desktop, wall or rack mount

Pro Max 16 PoE identity

The Ubiquiti Pro Max 16 PoE is a 16-port Layer 3 managed switch with 42 Gbps non-blocking throughput and 84 Gbps switching capacity. It provides 12 GbE PoE+ ports, 4 2.5 GbE PoE++ ports and 2 10G SFP+ uplinks. Etherlighting ports illuminate to show link status and native VLAN. The fanless desktop chassis also supports wall and rack mounting.

Pre-deployment checks

Verify that connected devices accept PoE+ or PoE++ power on RJ45 ports before enabling power. Confirm the 180 W total PoE budget covers the combined draw of all powered endpoints. Ensure SFP+ modules match the 10G speed required for uplinks. Plan VLAN and static routing configuration using the Layer 3 feature set for inter-VLAN traffic.

Thermals and power

The silent fanless cooling system dissipates heat without audible noise in normal operation. Total PoE availability is capped at 180 W across all 16 powered ports. Switching capacity of 84 Gbps and a forwarding rate of 62.496 Mpps are sustained within the desktop form factor. Buffer memory of 1.5 MB absorbs traffic bursts without active airflow.

Kohokohdat

  • Layer 3 routing with 84 Gbps switching capacity
  • 16 ports including four 2.5 GbE and two 10G SFP+
  • 180 W total PoE budget across all ports
  • Etherlighting ports show speed, link and native VLAN
  • Silent fanless cooling in desktop, wall or rack mount

Tekniset tiedot

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro Max 16 PoE
Part NumberUSW-Pro-Max-16-PoE
FormatDesktop
Network Management TypeManaged
Primary Ports16 x RJ45 + 2 x SFP
Primary Port SpeedTotal non-blocking throughput 42 Gbps
Switching capacity 84 Gbps
Forwarding rate 62.496 Mpps
Primary Port Type(12) GbE RJ45 ports
(4) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports
Management InterfaceEthernet In-Band
MAC Address Table16K
VLAN Support1000
Jumbo FramesYes
Packet Forwarding Rate62 Mpps
Buffer Memory1.5MB
IPv4 FeaturesIPv4: 128
IPv4 Routes: 512
PoEYes
Layer3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsEthernet
Locating
Speed/link
Native VLAN/network
SFP+
Locating
Speed/link
Native VLAN/network
PoE PortsPoE interface (12) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(4) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
PowerPower method DC adapter
Power supply 54V, 210W
Max. power consumption 30W (Excluding PoE output)
Total available PoE 180W
Max Power Consumption30W (Excluding PoE output)
Dimensions325.1 x 160 x 43.7 mm (12.8 x 6.3 x 1.7")
Weight2.1 kg (4.6 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network Version 8.1.127 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Lähetyspaino3.63 kg
Pakkauksen mitat559 × 305 × 152 mm

Tämän mallin muut versiot

4 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the box with the USW-Pro-Max-16-PoE and what must I source separately?

The package includes the 16-port switch itself; SFP+ transceivers for the two 10G uplinks, rack-mount brackets and any additional cabling are sold separately.

How do I decide between the 2.5 GbE PoE++ ports and the 1 GbE PoE+ ports on this model?

Four ports deliver 2.5 GbE with PoE++ for high-power or multi-gigabit devices; twelve ports provide 1 GbE with PoE+ for standard access points and cameras.

What does the 84 Gbps switching capacity mean for real traffic through this switch?

It represents the total non-blocking fabric bandwidth; the 16 RJ45 ports plus two 10G SFP+ ports can simultaneously forward up to 42 Gbps of actual throughput.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.