We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular desktop switch with sixteen RJ45 ports and two SFP+ cages

Ubiquiti Networks

Ubiquiti Networks USW-Pro-Max-16-PoE 16-port Layer 3 network switch

SKU CH-TJH2-SJ8WR MPN USW-Pro-Max-16-PoE

A managed 16-port Layer 3 PoE switch with twelve GbE, four 2.5 GbE and two 10G SFP+ ports, 84 Gbps switching capacity and 180 W PoE budget

  • FormatDesktop
  • Network Management TypeManaged
  • Primary Ports16 x RJ45 + 2 x SFP
  • Primary Port SpeedTotal non-blocking throughput 42 Gbps Switching capacity 84
  • Primary Port Type(12) GbE RJ45 ports (4) 1/2.5 GbE RJ45 ports (2) 10G SFP+ po
  • Management InterfaceEthernet In-Band

Model Pro Max 16 PoE

Primary Port 16 Port

  • Layer 3 routing with 84 Gbps switching capacity
  • 16 ports including four 2.5 GbE and two 10G SFP+
  • 180 W total PoE budget across all ports
  • Etherlighting ports show speed, link and native VLAN
  • Silent fanless cooling in desktop, wall or rack mount

Pro Max 16 PoE identity

The Ubiquiti Pro Max 16 PoE is a 16-port Layer 3 managed switch with 42 Gbps non-blocking throughput and 84 Gbps switching capacity. It provides 12 GbE PoE+ ports, 4 2.5 GbE PoE++ ports and 2 10G SFP+ uplinks. Etherlighting ports illuminate to show link status and native VLAN. The fanless desktop chassis also supports wall and rack mounting.

Pre-deployment checks

Verify that connected devices accept PoE+ or PoE++ power on RJ45 ports before enabling power. Confirm the 180 W total PoE budget covers the combined draw of all powered endpoints. Ensure SFP+ modules match the 10G speed required for uplinks. Plan VLAN and static routing configuration using the Layer 3 feature set for inter-VLAN traffic.

Thermals and power

The silent fanless cooling system dissipates heat without audible noise in normal operation. Total PoE availability is capped at 180 W across all 16 powered ports. Switching capacity of 84 Gbps and a forwarding rate of 62.496 Mpps are sustained within the desktop form factor. Buffer memory of 1.5 MB absorbs traffic bursts without active airflow.

Highlights

  • Layer 3 routing with 84 Gbps switching capacity
  • 16 ports including four 2.5 GbE and two 10G SFP+
  • 180 W total PoE budget across all ports
  • Etherlighting ports show speed, link and native VLAN
  • Silent fanless cooling in desktop, wall or rack mount

Specifications

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro Max 16 PoE
Part NumberUSW-Pro-Max-16-PoE
FormatDesktop
Network Management TypeManaged
Primary Ports16 x RJ45 + 2 x SFP
Primary Port SpeedTotal non-blocking throughput 42 Gbps
Switching capacity 84 Gbps
Forwarding rate 62.496 Mpps
Primary Port Type(12) GbE RJ45 ports
(4) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports
Management InterfaceEthernet In-Band
MAC Address Table16K
VLAN Support1000
Jumbo FramesYes
Packet Forwarding Rate62 Mpps
Buffer Memory1.5MB
IPv4 FeaturesIPv4: 128
IPv4 Routes: 512
PoEYes
Layer3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsEthernet
Locating
Speed/link
Native VLAN/network
SFP+
Locating
Speed/link
Native VLAN/network
PoE PortsPoE interface (12) PoE/PoE+ (Pins 1, 2+; 3, 6-)
(4) 60W PoE++ (Pair A 1, 2+; 3, 6-) (Pair B 4, 5+; 7, 8-)
PowerPower method DC adapter
Power supply 54V, 210W
Max. power consumption 30W (Excluding PoE output)
Total available PoE 180W
Max Power Consumption30W (Excluding PoE output)
Dimensions325.1 x 160 x 43.7 mm (12.8 x 6.3 x 1.7")
Weight2.1 kg (4.6 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network Version 8.1.127 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Shipping weight3.63 kg
Package size559 × 305 × 152 mm

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box with the USW-Pro-Max-16-PoE and what must I source separately?

The package includes the 16-port switch itself; SFP+ transceivers for the two 10G uplinks, rack-mount brackets and any additional cabling are sold separately.

How do I decide between the 2.5 GbE PoE++ ports and the 1 GbE PoE+ ports on this model?

Four ports deliver 2.5 GbE with PoE++ for high-power or multi-gigabit devices; twelve ports provide 1 GbE with PoE+ for standard access points and cameras.

What does the 84 Gbps switching capacity mean for real traffic through this switch?

It represents the total non-blocking fabric bandwidth; the 16 RJ45 ports plus two 10G SFP+ ports can simultaneously forward up to 42 Gbps of actual throughput.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.