We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount switch with 16 RJ45 ports and 2 SFP+ ports, fanless design

Ubiquiti Networks

Ubiquiti Networks USW-Pro-Max-16 16-port Layer 3 network switch

SKU CH-TFZ6-Q847J MPN USW-Pro-Max-16

16-port managed Layer 3 switch with twelve GbE, four 2.5 GbE and two 10G SFP+ ports, 84 Gbps switching capacity and silent fanless cooling

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports16 x RJ45 + 2 x SFP
  • Primary Port SpeedTotal non-blocking throughput 42 Gbps Switching capacity 84
  • Primary Port Type(12) GbE RJ45 ports (4) 1/2.5 GbE RJ45 ports (2) 10G SFP+ po
  • Management InterfaceEthernet In-Band

Model Pro Max 16

Primary Port 16 Port

  • Layer 3 routing with static routes and ACLs for network segmentation
  • 16 ports: 12 GbE, 4 2.5 GbE RJ45 and 2 10G SFP+
  • Fanless 25 W design runs silently in any environment
  • Etherlighting LEDs show port location, speed, link and native VLAN
  • Rack, wall or desktop mounting fits diverse deployments

Etherlighting 16-port Layer 3 switch

The Ubiquiti Networks USW-Pro-Max-16 is a 16-port managed switch with Layer 3 routing capabilities. It provides twelve Gigabit RJ45 ports, four 2.5 Gigabit RJ45 ports and two 10 Gigabit SFP+ ports in a fanless rackmount chassis. The Etherlighting feature uses port LEDs to show location, speed, link status and native VLAN assignment.

Who this suits and who should look elsewhere

Network administrators who need silent, high-density Layer 3 switching with visual port identification will benefit from the 42 Gbps non-blocking throughput and advanced features such as static routing, DHCP relay and ACLs. Buyers who require Power over Ethernet for access points or cameras, or who need more than sixteen copper ports, should consider a different model.

The uplink capacity that defines the fit

Two 10G SFP+ ports provide the only 10 Gigabit interfaces on the unit, setting the maximum uplink bandwidth for aggregation or core connectivity. This limit determines whether the switch can handle the uplink demands of a given deployment.

Highlights

  • Layer 3 routing with static routes and ACLs for network segmentation
  • 16 ports: 12 GbE, 4 2.5 GbE RJ45 and 2 10G SFP+
  • Fanless 25 W design runs silently in any environment
  • Etherlighting LEDs show port location, speed, link and native VLAN
  • Rack, wall or desktop mounting fits diverse deployments

Specifications

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro Max 16
Part NumberUSW-Pro-Max-16
FormatRackmount
Network Management TypeManaged
Primary Ports16 x RJ45 + 2 x SFP
Primary Port SpeedTotal non-blocking throughput 42 Gbps
Switching capacity 84 Gbps
Forwarding rate 62.496 Mpps
Primary Port Type(12) GbE RJ45 ports
(4) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports
Management InterfaceEthernet In-Band
VLAN SupportYes
Jumbo FramesYes
PoENo
Layer3
Layer 2 FeaturesIGMP snooping
STP / RSTP with priorities and port-level disable
Port isolation
Storm control
Voice VLAN
Port mirroring
LACP port aggregation
Multicast / broadcast rate limiting
MAC address blocking
Flow control
802.1X control
Jumbo frames
Proprietary loop protection
DHCP snooping / guarding
Egress rate limit
LLDP-MED
Port restricted by MAC
Device isolation with ACLs
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsEthernet
Locating
Speed/link
Native VLAN/network
SFP+
Locating
Speed/link
Native VLAN/network
ButtonFactory reset
PowerPower method Type-C adapter
Power supply 5V, 25W
Max. power consumption 25W
Max Power Consumption25 W
Dimensions325.1 x 160 x 43.7 mm (12.8 x 6.3 x 1.7")
Weight1.95 kg (4.3 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network Version 8.1.127 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Shipping weight2.99 kg
Package size521 × 248 × 102 mm

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box with the USW-Pro-Max-16 and do I need to buy SFP+ modules separately?

The package includes the switch and mounting accessories for rack, wall or desktop installation. SFP+ transceivers for the two 10G uplink ports are not included and must be purchased separately.

How do the 16 RJ45 ports differ in speed and which version should I choose for 2.5 GbE links?

Twelve ports run at 1 GbE and four ports support 2.5 GbE. Choose this model when you need a mix of standard and 2.5 GbE downlinks without PoE; the PoE variant adds power output on the same port layout.

What does the 42 Gbps non-blocking throughput mean for real-world traffic through the switch?

The 42 Gbps figure is the total non-blocking throughput across all 16 RJ45 and 2 SFP+ ports, with a 84 Gbps switching capacity and 62.496 Mpps forwarding rate, so every port can run at its rated speed simultaneously without congestion.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.