Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight black DDR5 RDIMM sticks with silver micro-heatsinks on RCD and PMIC chips

V-color

V-color WRX90 OC R-DIMM 256GB (8x32GB) DDR5 7200 CL34 1.4V ECC Registered Memory Upgrade

SKU CH-Y884-80RKH

Eight 32 GB DDR5 registered ECC modules at 7200 MT/s CL34 with EXPO profiles and patented RCD micro-heatsinks for AMD Threadripper WRX90 workstations

  • Capacity256GB (8 x 32GB)
  • SpeedDDR5 7200 (PC5 57600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetSK Hynix IC
  • Voltage1.4V

Capacity 256GB (8 x 32GB)

Speed DDR5 7200 (PC5 57600)

  • ECC registered design protects data integrity on critical workloads
  • 7200 MT/s DDR5 speed with CL34 latency accelerates workstation throughput
  • 256 GB across eight 32 GB modules maximises Threadripper WRX90 capacity
  • Patented RCD and PMIC micro-heatsinks lower chip temperatures by 30 to 40 percent
  • AMD EXPO profile enables one-click overclocking at 1.4 V

V-color WRX90 OC R-DIMM 256GB Kit

This 256GB kit contains eight 32GB DDR5 registered DIMMs rated at 7200 MT/s with CL34 timings. It targets professionals building AMD Threadripper PRO 7000 series workstations on WRX90 motherboards who need maximum capacity with on-die ECC protection. The modules run at 1.4V and expose an AMD EXPO profile for one-click overclocking.

Registered 288-Pin Design With Micro-Heatsinks

Each stick uses a 10-layer PCB populated with SK Hynix ICs in a 2Rx8 configuration. Patented copper-alloy micro-heatsinks cover the RCD and PMIC components, lowering their temperatures by roughly 30 to 40 percent compared with bare modules. The registered buffer reduces electrical load on the memory controller, a requirement for stable operation at this density and speed.

AMD EXPO Profile And Tested Reliability

The bundled EXPO profile configures 34-45-45-112 timings automatically on compatible WRX90 boards, removing manual tuning. Every IC passes automated sorting and the finished modules undergo rigorous validation on a 10-layer PCB, ensuring consistent quality across all eight sticks in the kit.

Kohokohdat

  • ECC registered design protects data integrity on critical workloads
  • 7200 MT/s DDR5 speed with CL34 latency accelerates workstation throughput
  • 256 GB across eight 32 GB modules maximises Threadripper WRX90 capacity
  • Patented RCD and PMIC micro-heatsinks lower chip temperatures by 30 to 40 percent
  • AMD EXPO profile enables one-click overclocking at 1.4 V

Tekniset tiedot

BrandV-Color
SeriesWRX90 OC R-DIMM
ModelTRA532G72D834O
Part NumberTRA532G72D834O
Capacity256GB (8 x 32GB)
SpeedDDR5 7200 (PC5 57600)
ECCYes
Buffered/RegisteredRegistered
ChipsetSK Hynix IC
Voltage1.4V
Compatible SystemAMD Threadripper - WRX90 Workstation Motherboards
CAS LatencyCL34
Timing34-45-45-112
Heat SpreaderYes
Type288-Pin DDR5 RDIMM
Rank2Rx8
BIOS/Performance ProfileAMD EXPO
FeaturesEquipped with patented exclusive RCD and PMIC Micro-Heatsink for improved cooling efficiency.

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed and CAS latency does this WRX90 OC R-DIMM kit run at with the AMD EXPO profile?

The kit operates at DDR5 7200 with CL34 timings (34-45-45-112) when the AMD EXPO profile is enabled in the BIOS.

What physical slot type and pin count do these modules require on the motherboard?

Each module is a 288-pin DDR5 RDIMM, so the motherboard must provide 288-pin DDR5 RDIMM slots.

How are the patented RCD and PMIC micro-heatsinks installed, and what mistake should be avoided?

The micro-heatsinks come pre-attached to the RCD and PMIC; do not remove them, as they are essential for cooling those components at 1.4 V operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.