Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight silver DDR5 RDIMMs with black heat spreaders and small copper micro-heatsinks on the register and PMIC chips

V-color

V-color WRX90 OC R-DIMM 512GB (8×64GB) DDR5 5600 CL36 1.25V ECC Registered 2Rx4 AMD EXPO

SKU CH-YC3N-M8FAY

Eight-module 512 GB DDR5 5600 CL36 registered ECC kit with AMD EXPO profiles and micro-heatsink cooling for WRX90 workstations

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-38-38-80
  • Voltage1.25V

Capacity 512GB (8 x 64GB)

Speed DDR5 5600 (PC5 44800)

  • 512 GB total capacity for massive workstation workloads
  • DDR5 5600 CL36 with AMD EXPO profile for tuned overclocking
  • ECC registered 2Rx4 design protects data integrity under load
  • Patented RCD and PMIC micro-heatsinks lower module temperatures by 30–40 %
  • 10-layer PCB with SK Hynix ICs validated for WRX90 Threadripper PRO 7000 systems

WRX90 OC R-DIMM 512GB kit

This 512GB kit contains eight 64GB DDR5 registered DIMMs built for AMD Threadripper WRX90 workstation motherboards. Each module runs at 5600MHz with CL36 timings and 1.25V. ECC and registered buffering protect data integrity in professional workloads. The AMD EXPO profile enables one-click overclocking on supported platforms.

Sustained load behaviour

Hynix ICs on a 10-layer PCB are validated through automated sorting and rigorous testing. Patented micro-heatsinks on the RCD and PMIC lower component temperatures by 30 to 40 percent compared with bare modules. This cooling helps maintain the 5600MHz CL36 36-38-38-80 timing under continuous workstation loads. ECC corrects single-bit errors without halting the system.

Installation notes

The 288-pin RDIMMs install in standard DDR5 slots on WRX90 boards; the EXPO profile loads automatically in BIOS when enabled. All eight modules must be populated for the rated 512GB capacity. Builders who need fewer than eight modules or a different capacity should choose another kit. Compatibility is limited to AMD Threadripper PRO 7000 series on WRX90 chipsets.

Kohokohdat

  • 512 GB total capacity for massive workstation workloads
  • DDR5 5600 CL36 with AMD EXPO profile for tuned overclocking
  • ECC registered 2Rx4 design protects data integrity under load
  • Patented RCD and PMIC micro-heatsinks lower module temperatures by 30–40 %
  • 10-layer PCB with SK Hynix ICs validated for WRX90 Threadripper PRO 7000 systems

Tekniset tiedot

BrandV-Color
SeriesWRX90 OC R-DIMM
ModelTRA564G56D436O
Part NumberTRA564G56D436O
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-38-38-80
Voltage1.25V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
BIOS/Performance ProfileAMD EXPO
ChipsetSK Hynix IC
Heat SpreaderYes
Compatible SystemAMD Threadripper - WRX90 Workstation Motherboards
FeaturesEquipped with patented exclusive RCD and PMIC Micro-Heatsink for improved cooling efficiency.

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat does the patented micro-heatsink on the RCD and PMIC actually remove when the kit runs at 5600 CL36 all day?

The copper-alloy micro-heatsink cuts RCD and PMIC temperatures by 30-40 % compared with bare modules, keeping the 1.25 V DDR5 OC R-DIMM stable during sustained workloads.

Which motherboard platform must I already have for this 8×64 GB kit to function?

An AMD Threadripper PRO 7000-series CPU on a WRX90 workstation motherboard with 288-pin DDR5 slots is required; the kit is validated only for that platform.

Can I mix these 2Rx4 Hynix IC modules with other DDR5 RDIMMs I already own?

Mixing ranks, IC vendors or EXPO profiles is not recommended; for guaranteed 5600 CL36 operation the full 512 GB kit should populate all channels identically.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.