Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Pink 120mm ARGB case fan with infinite mirror centre and translucent blades

Vetroo

Vetroo LF120 120mm ARGB Case Fan Pink

SKU CH-PWR3-4Y9AS

A 120 mm pink case fan with addressable RGB infinite-mirror lighting, PWM control from 600 to 1600 RPM, fluid dynamic bearing and eight rubber pads for 25 to 30 dBA operation

  • Fan Size120mm
  • LEDAddressable RGB
  • TypeNormal Airflow
  • Bearing TypeFluid Dynamic Bearing
  • RPM800-1600 RPM
  • Air Flow45-50 CFM

Type Forward Blade

Number 1-Pack

  • Infinite-mirror design on both sides and centre for distinctive visuals
  • 5 V 3-pin ARGB sync matches motherboard lighting across the build
  • PWM control from 800 to 1600 RPM delivers up to 48 CFM airflow
  • Fluid dynamic bearing with eight rubber pads keeps noise between 25 and 30 dBA
  • Standard 120 mm frame fits most cases, air coolers and water-cooling radiators

Pink ARGB case fan with infinite-mirror lighting

The Vetroo LF120 is a single 120 mm case fan finished in pink. It uses addressable RGB LEDs behind an infinite-mirror design on both faces and the centre hub. A fluid-dynamic bearing and eight rubber pads keep vibration low. The fan connects via a 4-pin PWM header and a 5 V 3-pin ARGB header for motherboard synchronisation.

Suited to builders who want quiet pink accent

This fan fits users adding colour-coordinated airflow to a pink or pastel build. The 25-30 dBA noise range and PWM control suit noise-sensitive systems. It is not for buyers who need high static pressure for dense radiators, nor for anyone requiring a bundled controller or multiple fans in one package.

Delivers 45-50 CFM at 800-1600 RPM

At full speed the fan moves up to 48 CFM, enough for general chassis intake or exhaust. The 600-1600 RPM PWM range provides headroom for light radiator use, but airflow drops below 45 CFM at lower speeds. It will not satisfy high-restriction loops or heavily overclocked configurations that demand substantially more pressure.

Kohokohdat

  • Infinite-mirror design on both sides and centre for distinctive visuals
  • 5 V 3-pin ARGB sync matches motherboard lighting across the build
  • PWM control from 800 to 1600 RPM delivers up to 48 CFM airflow
  • Fluid dynamic bearing with eight rubber pads keeps noise between 25 and 30 dBA
  • Standard 120 mm frame fits most cases, air coolers and water-cooling radiators

Tekniset tiedot

BrandVetroo
Fan Size120mm
LEDAddressable RGB
TypeNormal Airflow
Bearing TypeFluid Dynamic Bearing
RPM800-1600 RPM
Air Flow45-50 CFM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorPink
CompatibilityCase
Fan Counts1 Fan
Fan ControllerNo Controller
Fan Thickness25mm
Dimensions120×120×25mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does my motherboard need a 5V 3-pin ARGB header for the lighting to work?

Yes, the addressable RGB lighting synchronises through a 5V 3-pin connector on the motherboard.

Will the 4-pin PWM connector run on an older 3-pin fan header?

The fan uses a 4-pin PWM connector; it will run on a 3-pin header but speed control will be voltage-based instead of PWM.

How can I confirm the fan is spinning within its specified range after installation?

Check the motherboard monitoring software or BIOS — the fan should report between 800 and 1600 RPM under PWM control.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.