Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Vetroo

Vetroo LR120 Pink 2-Pack 120mm Reverse Blade ARGB Case Fan

SKU CH-KJTH-QQH04

Two 120 mm reverse-blade ARGB fans with infinite-mirror lighting, fluid-dynamic bearings and PWM speed control from 800 to 1600 RPM for 45 to 50 CFM airflow at 25 to 30 dBA

  • Fan Size120mm
  • LEDAddressable RGB
  • TypeReverse Blade
  • Bearing TypeFluid Dynamic Bearing
  • RPM800-1600 RPM
  • Air Flow45-50 CFM

Type Reverse Blade

Number 2-Pack

  • Front-facing blades showcase internal lighting
  • Infinite mirror panels on both sides create depth
  • 5 V 3-pin ARGB syncs with motherboard software
  • PWM adjusts 800-1600 RPM for 45-50 CFM airflow
  • Fluid dynamic bearing plus eight rubber pads limit noise to 25-30 dBA

Two-Pack Pink Reverse-Blade ARGB Fans

This 2-pack supplies a pair of 120 mm reverse-blade fans finished in pink, each fitted with addressable RGB lighting and an infinite-mirror face on both sides and the centre. The fans connect to a motherboard via a 5 V 3-pin ARGB header for synchronised colour control and a standard 4-pin PWM header for speed regulation. Fluid dynamic bearings and eight rubber pads per fan keep mechanical noise low.

Upgrade from Single-Colour or Standard Blade Fans

Builders replacing single-colour LED fans or conventional blade designs gain a visible front face that showcases the mirror lighting from either intake or exhaust positions. The jump is worthwhile when the case layout puts the fan front side on display and the motherboard offers a 5 V ARGB header for full colour sync.

Suits Showcase Builds with ARGB Headers

The kit fits users who want coordinated pink lighting visible through tempered glass and who have a 5 V 3-pin ARGB header available. Builders without an addressable RGB header, or who prefer higher static pressure for dense radiators, should look at alternatives.

Kohokohdat

  • Front-facing blades showcase internal lighting
  • Infinite mirror panels on both sides create depth
  • 5 V 3-pin ARGB syncs with motherboard software
  • PWM adjusts 800-1600 RPM for 45-50 CFM airflow
  • Fluid dynamic bearing plus eight rubber pads limit noise to 25-30 dBA

Tekniset tiedot

BrandVetroo
Fan Size120mm
LEDAddressable RGB
TypeReverse Blade
Bearing TypeFluid Dynamic Bearing
RPM800-1600 RPM
Air Flow45-50 CFM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorPink
CompatibilityCase
Fan Counts2 Fans
Fan ControllerNo Controller
Fan Thickness25mm
Dimensions120×120×25mm

Tämän mallin muut versiot

2 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What clearance does each 120 mm reverse-blade fan need inside the case?

Each fan measures 120×120×25 mm and includes eight rubber mounting pads that add a small amount of extra height, so allow at least 25 mm of depth plus pad thickness.

How do I connect the ARGB lighting and PWM control to the motherboard?

Plug the 5 V 3-pin ARGB header into the motherboard's addressable RGB connector and the 4-pin PWM cable into a 4-pin fan header; both must be seated fully for sync and speed control to work.

What long-term maintenance does the fluid dynamic bearing require?

The FDB bearing is sealed and maintenance-free; periodic dust removal from the nine reverse blades and rubber pads keeps noise at the rated 25–30 dBA level.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.