Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Enclosed desktop laser engraver with transparent safety cover and aluminium frame, 11.8 inch square work area visible inside

VEVOR

VEVOR JL3PRO 10W Laser Engraver 11.8 in Class 1

SKU CH-GHGN-2AP98

Enclosed 10 W diode laser engraves and cuts wood, leather and glass across an 11.8 x 11.8 in bed at up to 7000 mm/min with Class 1 safety

  • TypeOther Appliances
  • Cuts 0.2 in basswood in one pass with 10000 mW output
  • 10 x 0.12 mm spot size at 455 nm for precise detail
  • Class 1 enclosure with emergency stop and tilt sensors for safe operation
  • 8 x 11.8 in bed and 7000 mm/min speed for fast project throughput
  • 32-bit controller drives LaserGRBL, LightBurn and CutLabX on multiple platforms

Compact Enclosed Engraver

The VEVOR JL3PRO is a Class 1 diode laser engraver with a 10 W optical output and an 11.8 x 11.8 in enclosed work area. It suits hobbyists and small workshops that need a self-contained machine for wood, leather, glass and certain metals without external ventilation.

Installation And Common Issues

The unit ships fully assembled so setup is limited to placing it on a stable surface, connecting USB and installing LaserGRBL, LightBurn or CutLabX. The main friction point is configuring the correct device profile and focal distance in the chosen software before the first job.

10 W 455 nm Diode Module

The 455 nm laser produces a 0.10 x 0.12 mm spot driven by a 32-bit controller at up to 7,000 mm/min. That optical power and spot size determine whether the machine can cut 0.2 in basswood in one pass or only mark harder materials.

Kohokohdat

  • Cuts 0.2 in basswood in one pass with 10000 mW output
  • 10 x 0.12 mm spot size at 455 nm for precise detail
  • Class 1 enclosure with emergency stop and tilt sensors for safe operation
  • 8 x 11.8 in bed and 7000 mm/min speed for fast project throughput
  • 32-bit controller drives LaserGRBL, LightBurn and CutLabX on multiple platforms

Tekniset tiedot

TypeOther Appliances

Kysymyksiä tästä tuotteesta

How do I confirm the 10W laser engraver is operating correctly after setup?

Run a test pattern at 7000 mm/min on scrap material and verify the 0.10 x 0.12 mm spot produces clean edges without vibration on the aluminum frame.

What is included in the box and what must be purchased separately?

The package contains the JL3PRO engraver only; LightBurn software requires a paid license while LaserGRBL and CutLabX are free downloads.

Which software version should I choose for the 455 nm diode engraver?

Use LaserGRBL on Windows for basic control, LightBurn on Mac or Windows for advanced features with a paid license, or CutLabX across Mac, Windows, and mobile app.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.